|
|
|
|
Joined: Aug 2011
Posts: 11
Member
|
|
Member
Joined: Aug 2011
Posts: 11 |
I am having an issue wtih adding an SX200 PRI card to an SX200ICP in a digital cabinet.
I programmed the bay in for 53.
I changed the node type to isdn node and programmed slot 6 for the PRI.
I programmed trunks in slot 15.
I programmed the digital link assignment in for 43.
I cant see the trunk card as installed in form 1.
The PRI is plugged into slot 11 of a peripheral bay (002 cabinet)with a copper module and both dip switches are closed.
Does anyone know what i am missing?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Oct 2004
Posts: 1,057
Member
|
|
Member
Joined: Oct 2004
Posts: 1,057 |
Has the PRI card loaded properly? What are the LED indications on the card itself? FYI, form 43 only has a general effect on a PRI card. You still need to use IMAT to set up the D Channel signaling, etc.
Last edited by fifty5footer; 03/05/14 09:45 AM.
|
|
|
|
Forums84
Topics94,515
Posts639,967
Members49,848
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (nortelvoip),
287
guests, and
39
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
