|
|
Joined: Mar 2014
Posts: 13 Likes: 1
Member
|
OP
Member
Joined: Mar 2014
Posts: 13 Likes: 1 |
Can anyone tell me what the Avaya sends to the Contact Closure Adjunct. I wanted to see if I can reuse it on a Voip instillation.
Thanks!
Sam
|
|
|
|
|
Joined: Jul 2001
Posts: 3,344 Likes: 10
Moderator-Avaya-Lucent, Antique Tele
|
|
Moderator-Avaya-Lucent, Antique Tele
Joined: Jul 2001
Posts: 3,344 Likes: 10 |
Hi Sam-
Which Avaya system are you coming off of?
|
|
|
|
|
Joined: Mar 2014
Posts: 13 Likes: 1
Member
|
|
OP
Member
Joined: Mar 2014
Posts: 13 Likes: 1 |
The Avaya system is gone :-(
We replaced it with a hosted PBX.
Trying to salvage what is left :-)
The question is what signals did the Avaya send to the RJ11 port of the PARTNER Contact Closure Adjunct.
Sam
|
|
|
|
|
Joined: Jul 2001
Posts: 3,344 Likes: 10
Moderator-Avaya-Lucent, Antique Tele
|
|
Moderator-Avaya-Lucent, Antique Tele
Joined: Jul 2001
Posts: 3,344 Likes: 10 |
Unfortunately it was not a dry contact from the ACS itself, it was a TTL level signal that triggered the adjunct.
You would probably need to use something like a Viking Electronics RC-2A and an ATA adapter. Call the ATA's extension number, the RC-2A answers, dial a Touch-Tone code to trigger the relay to open the door. If you have a door phone interfaced with an ATA on the system, you can use the RC-2A wired in series to "listen" for the touch-tones to trip the relay.
|
|
|
|
|
Joined: Mar 2014
Posts: 13 Likes: 1
Member
|
|
OP
Member
Joined: Mar 2014
Posts: 13 Likes: 1 |
Sam
|
|
|
|
Forums84
Topics94,294
Posts638,834
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
139
guests, and
346
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
