EMP & Lightning Home Surge Protection
EMP - Click Here!
Phone.com 300x250
300x250 Your Business Phone Service in the Cloud
Global Test Supply
Linked Banner to your Product or Website
Meticore Weight Loss Voted #1.
Daily Excellence
Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: May 2014
Posts: 1
OP Offline
Joined: May 2014
Posts: 1
I have Toshiba PIX-200, and want outgoing sip calls working with an external voip provider.

In short everything was working with one sip account configured, i have gone and added more URI's under the SIP Trunking section.

I have configured DID for them and dialing in (from say a mobile) works for these numbers, so i know they have registered correctly with the external voip provider.

I have them all assigned to one OLG, and a pooled key.

When I dial out I always get the same Caller ID show up (the first URI).

And after the third call, I get call abandoned if trying to make more external calls. Guessing due to them all using the 1 voip account and it not allowing more than 3 calls with those credentials.

How do I make it use all the URI's for outgoing call's rather than just the first one? I have read the manual and it seems to be under the service definition tab, but i am unsure.

Thanks heaps

Global Test Supply 728x90
Joined: Oct 2006
Posts: 44
Joined: Oct 2006
Posts: 44
You need two things. Set the calling number for a station which I guess you already know. The other requires a 10 digit URI record for each caller ID. The catch is the CIX system only allows a very limited number of URI records.

Moderated by  Carlos#1, phonemeister 

Link Copied to Clipboard
Advertising Sponsor
Popular Topics (Views)
Forum Statistics
Most Online5,661
May 23rd, 2018
Today's Birthdays
docjim, eddycurrent, FC de Argentina, matts520, NetworkKing, Randy from RACE, Zyeith
Newest Members
Goracing57, Michael Duffy, Jim22, hummerdave, Rusenga D
49,481 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
Top Posters (30 Days)
dexman 33
Ruben 9
Advertising Sponsor Spot 2
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Who's Online Now
18 members (jeffmoss26, dexman, EV607797, justbill, Carl Navarro, metelcom, sundance, BrianS, mbhydro, hitechcomm, OBT, Silversam, pvj, Professor Shadow, hbiss, Keyset6, JBean3329, 1 invisible), 156 guests, and 144 robots.
Key: Admin, Global Mod, Mod
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2021
Trusted Partners
landing page builder Antiransomware 300x250 Your Business Phone Service in the Cloud