how do I know what extention a new phone install should be?

Print Thread

Rate Thread

how do I know what extention a new phone install should be? #574749 07/23/14 07:02 PM
Joined: Mar 2007 Posts: 352 delta bc surdel OP Member
OP surdel Member Joined: Mar 2007 Posts: 352 delta bc	A resteraunt is expanding and additional phones will be installed. I would assume, any key system such as this KX-TDA30, will have all the lines terminated to the bix punch down. Are these systems preset at the factory with given extentions set to per line comming out of the system? What keys on the phone will reveal the extention the phone belongs to? Thanks

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: how do I know what extention a new phone install should be? surdel #574761 07/23/14 10:04 PM
Joined: Mar 2004 Posts: 488 Alberta Canada phoneguywayne Member
phoneguywayne Member Joined: Mar 2004 Posts: 488 Alberta Canada	You are going to have to be sure that there is a station card to support the extra sets. Some systems are programmed as 101 102 etc. Panasonic just changed the set type to 500 series. If you are installing the T7667 press the transfer key will tell the extention number

Re: how do I know what extention a new phone install should be? surdel #574768 07/24/14 12:22 AM
Joined: May 2003 Posts: 2,924 mesquite tx brokeda Member
brokeda Member Joined: May 2003 Posts: 2,924 mesquite tx	Any phone call a display phone.

Moderated by Carl Navarro, OBT

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems Panasonic Telephones & Systems how do I know what extention a new phone install should be?