|
|
|
|
Joined: Aug 2012
Posts: 73
Member
|
|
Member
Joined: Aug 2012
Posts: 73 |
Hi all
I cant get my sip co to work on ipec. It registers and i can recieve calls however when i go to make calls it just hangs. Q wireshark show no attempt to even make the call. Any ideas??
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2003
Posts: 5,155 Likes: 5
Moderator-Vertical, Vodavi
|
|
Moderator-Vertical, Vodavi
Joined: Aug 2003
Posts: 5,155 Likes: 5 |
They're are a lot of settings to make SIP work on the IPECS, so it's hard to say what may be going wrong. Most SIP carriers have specific instructions for each type of hardware, do you have any information available from your carrier for the IPECS?
How is your "SIP User ID Attributes" setup? I'm assuming you're just using attribute 1 for all of your extensions? The first 3 settings are generally something like:
Registration User ID: username@ipaddressofSIPserver
Authentication User ID: username
Authentication Password: password
A big one that is often missed is under "Station Attributes". Each extension needs to have the "SIP User Table Index" set to 1, or whichever SIP User Table you're using. If it is set to "0" (default), you won't be able to dial out.
|
|
|
|
Forums84
Topics94,518
Posts639,974
Members49,849
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
214
guests, and
47
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
