|
|
|
|
Joined: Dec 2009
Posts: 105
Member
|
|
Member
Joined: Dec 2009
Posts: 105 |
Has anybody installed a 7400 with Centrex trunks?
I have a customer who currently has Centrex from the local Telco. They would like have a PBX at the main location but the OPX circuits would exceed Samsung's specs (3280ft). After doing a test, while we can connect to an analog phone the volume is low. The distance we need to go is 7500 to 9000ft.
So is it possible to program the 7400 so that if it receives a call destined for one of these remote stations it can hook/flash the CO switch to re-route the call?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2006
Posts: 1,813 Likes: 15
Moderator-Iwatsu
|
|
Moderator-Iwatsu
Joined: Aug 2006
Posts: 1,813 Likes: 15 |
Check with TELCO to see if trunk to trunk conference is available on the lines. That would help the low volume problem.
Sometimes the thoughts in my head get so bored, they go for a stroll through my mouth. This is rarely a good thing.
|
|
|
|
|
Joined: Jun 2006
Posts: 3,004 Likes: 4
Moderator-Samsung
|
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,004 Likes: 4 |
Increase the gain for analogue trunks
|
|
|
|
|
Joined: May 2004
Posts: 761 Likes: 2
Member
|
|
Member
Joined: May 2004
Posts: 761 Likes: 2 |
The 7400 works great behind Centrex. You have dial blocks that can do the transfer to the remote site with a problem. Very easy to set up.
|
|
|
|
|
Joined: Dec 2009
Posts: 105
Member
|
|
Member
Joined: Dec 2009
Posts: 105 |
It is with the OPX lines connected to the Samsung analog ports that have the low volume.
Each Centrex station has in essence their own DID so if someone dials their 7 digit # it would ring directly to them. If a call comes to the main number that would be answered by the 7400 I could use a dial block to flash the CO and transfer.
This all assumes that the Telco supports Centrex on a PRI.
|
|
|
|
Forums84
Topics94,543
Posts640,074
Members49,857
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (justbill, BobRobert),
295
guests, and
33
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
