|
|
|
|
Joined: Jan 2007
Posts: 100
Member
|
|
Member
Joined: Jan 2007
Posts: 100 |
I have a customer with a couple AT&T 1080 4 line phones. They are only using 1 phone line. They would like to setup some paging into a small workshop area. The Valcom V-9941A Talk Back paging controller can connect to a CO Trunk Port on a PBX/Key System. My question is this, could I hook that unit up to one of the unused lines on the AT&T 1080 phone and page out into the shop. I have talked with Valcom support and they don't have a solid answer for me either way. If anyone has any experience or thought on this I am open to suggestions.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2010
Posts: 223 Likes: 1
Member
|
|
Member
Joined: Jan 2010
Posts: 223 Likes: 1 |
|
|
|
|
|
Joined: May 2007
Posts: 5,059 Likes: 6
Moderator-1A2, Cabling
|
|
Moderator-1A2, Cabling
Joined: May 2007
Posts: 5,059 Likes: 6 |
Mike -
Let us know how it works out.
Sam
"Where are we going and why are we in this hand basket?"
|
|
|
|
|
Joined: Feb 2006
Posts: 1,716
Member
|
|
Member
Joined: Feb 2006
Posts: 1,716 |
There is an easy way to test. Hook up a butt set to the T&R of the Valcom and hook a speaker to the output. If you can page, then it works.
I have used the Valcom units on various dry CO ports and it worked.
Rcaman
Americom, Inc.
Where The Art And Science Of Communications Meet
|
|
|
|
|
Joined: Jan 2007
Posts: 100
Member
|
|
Member
Joined: Jan 2007
Posts: 100 |
Thanks guys, I will let you know how this works out.
|
|
|
|
Forums84
Topics94,518
Posts639,976
Members49,850
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
215
guests, and
42
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
