|
|
|
|
Joined: Feb 2011
Posts: 62
Member
|
|
Member
Joined: Feb 2011
Posts: 62 |
Does anyone have experience with SV8100 SIP Trunk set up for Entelegent/Pulsar 360?
There are 4 SIP trunks, and 10 DIDs.
I have experience with CBeyond and Telepacific. Since Pulsar 360 is not a certified NEC SIP trunk provider, there are no data sheets for the set up. I have adapted the CBeyond settings from the guide in an attempt to get the SIP trunks to register. At one point the system did register and dialing a DID would ring, but the phones would get a busy tone when picked up. Right now, I am unable to get the system to register with the Pulsar360.
From Pulsar350, I have a "realm", a proxy, a user ID and a password. I am unsure of what equals what in the SIP programming, and there are so many variables, it's been daunting. Can anyone give me some ideas?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2004
Posts: 4,220 Likes: 2
Member
|
|
Member
Joined: Sep 2004
Posts: 4,220 Likes: 2 |
Best bet is to get NTAC on the line and get a wireshark trace.
Last edited by Coral Tech; 09/06/14 04:47 AM.
|
|
|
|
|
Joined: Feb 2011
Posts: 62
Member
|
|
Member
Joined: Feb 2011
Posts: 62 |
This was taken over by another vendor. They are replacing the router.
Thanks Coral.
|
|
|
|
Forums84
Topics94,491
Posts639,864
Members49,836
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (SeyerIT, Toner),
275
guests, and
26
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
