|
|
|
|
Joined: Jan 2009
Posts: 29
Member
|
OP
Member
Joined: Jan 2009
Posts: 29 |
I've bought a batch of second hand 8622's that I cannot get into program using the usual press of 7+8 at power up. None of the other key combinations (1+2, 5+6) do anything.
Some of them seem to have static IP's assigned that I can't change. One is picking up an IP from DHCP but then reverts to "File not found - SIP/Key/Display XML" and then "SIP registration failed"
From reading other threads, it is likely they have old firmware. A sticker on the bottom has been put over the original firmware version sticker and says "ITSIPB_1.0.5.10".
The webpage on https://IP-ADDR:8080 prompts for login but I can't get into it with ipt/iptpassw or with a few other defaults found googling.
I can telnet to the device but not sure what to do from then. I get a "->" prompt and nothing else
Can anyone advise if it is possible to upgrade these to use with my CS5000?
Thanks
Cammy
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2009
Posts: 29
Member
|
|
OP
Member
Joined: Jan 2009
Posts: 29 |
Managed to resolve this by holding down (infinity key) feature,3+7 at power on and kept it held for about 30 seconds. This defaults the phone and it got an IP address from DHCP. After that navigated to the webpage, logged in with IPT and no password on https://[IP_ADDR]:8080 and used tftpd32 to serve the v2 firmware that I've got in the download tab of the webpage.
|
|
|
|
Forums84
Topics94,294
Posts638,834
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
110
guests, and
336
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
