web statisticsweb stats

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#578992 10/17/14 05:20 AM
Joined: Dec 2007
Posts: 125
Member
Member
Offline
Joined: Dec 2007
Posts: 125
kxtd 1232-6 control unit pri card
att circuit with provided 50 foot crossover cable
will not link

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: May 2003
Posts: 2,924
Member
*****
Member
*****
Joined: May 2003
Posts: 2,924
Is it set to NI1?
Panasonic wants a CSU.



Subject: KX-TD1232 PRI Card (KX-TD290) Installation

Document Number: KXTD1232021

Before you start you must have Software Version P211Q20604A (-6) or higher If you require an upgrade, call VND at 1-888-201-4030. Your KX-TD170 cards must have a Cor higher as the fifth digit of the serial number. If not you must replace them. Ordering your PRI Lines

The card supports Nat 1 service, ESF, F72, F4, & F12 framing formats and line formats AMI or B8ZF

The circuits should not be ordered with line power. Have the Circuit terminated on a RJ-48C jack. Check the CSU specifications for distance limitations between the CSU and the service provider termination.

Hardware Requirements

-PRI ISDN (KX-TD290) One maximum per system.

-PLL Phase Locked Loop card (KX-TD112) Master system only

-Channel Service Unit (CSU) One required per system. - PRI to CSU cable.

-CSU to RJ-48C cable.

Install the KX-TD290 & KX-TD112 cards following the installation instructions in manual. Install the CSU and cabling per the manufacturers instructions.
Back to listing

Last edited by brokeda; 10/17/14 12:55 PM.
Joined: May 2003
Posts: 2,924
Member
*****
Member
*****
Joined: May 2003
Posts: 2,924
???

Joined: Dec 2007
Posts: 125
Member
Member
Offline
Joined: Dec 2007
Posts: 125
took the dash 6 and pri card did not work on it
tried a dash 6 with a date code 1 year newer and it worked
csu was not needed
thank you


Moderated by  Carl Navarro, OBT 

Link Copied to Clipboard
Newest Topics
SV8100 beeping
by Jackcmann - 04/10/25 05:29 AM
Samsung xchange server
by scanjet - 04/07/25 06:37 PM
NEC IP Phones
by juno - 04/04/25 09:05 AM
NEC IP phones rebooting
by jpet621 - 04/03/25 03:03 PM
Forum Statistics
Forums84
Topics94,515
Posts639,967
Members49,848
Most Online5,661
May 23rd, 2018
Newest Members
Kevin usama, Pruitt roger, ActiveTelephones, yeloshak, ty3995
49,847 Registered Users
Top Posters(30 Days)
Toner 9
Taddeo 6
dexman 3
Who's Online Now
0 members (), 287 guests, and 31 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998 - 2025
Powered by UBB.threads™ PHP Forum Software 8.0.0