|
|
|
|
Joined: Jul 2006
Posts: 38
Member
|
|
Member
Joined: Jul 2006
Posts: 38 |
We have a Big Iron(not Inter-Tel)system at HQ in Texas. We have Inter-Tel 4.4 in Oklahoma. Currently we have non PRI PTP T1s connectiong the two. We have non PRI for out bound in Okla. We route intralata calls to Okla and back to Texas to get interlata rates. Works well except called party sees Okla number in caller ID not Texas Caller ID. If we replace ptp with PRI as well as outbound with PRI can I pass Texas number to outbound PRI in Okla? If needed we can upgrade 4.4 to non license Inter-Tel ver, say 5.2F or 6.2. These are all ATT T1s.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Oct 2007
Posts: 6
Member
|
|
Member
Joined: Oct 2007
Posts: 6 |
no The only way to do this with the phone system would be to tie a lsc card to a slc card. Put the lsc card in it own truck group with outgoing access to the remote system as first choice in ars.
|
|
|
|
|
Joined: Jul 2006
Posts: 38
Member
|
|
Member
Joined: Jul 2006
Posts: 38 |
That's not the only way. EM connectivity, using ARS in Big Iron I send digits from Big Iron to AXXESS as an inbound call with call routing table and E+ dial rule. I think I realized after I sent this it's going to be an issue with Big Irons D-Channel. I think using PRI will do the trick. I think...
|
|
|
|
Forums84
Topics94,516
Posts639,970
Members49,848
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
108
guests, and
31
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
