|
|
|
|
Joined: Nov 2006
Posts: 264
Member
|
|
Member
Joined: Nov 2006
Posts: 264 |
in one of our SV8300 pbxs, any digital tel lifts the handset the screen shows " Operator " instead of the self tel number.
and this happensfor ALL Digital telephone in the pbx.
no previous programming was done as far as I know.
how could that occur?
Lee
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
|
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
Can you still make & receive calls?
Last edited by DrPbx; 11/17/14 01:01 PM.
|
|
|
|
|
Joined: Nov 2006
Posts: 264
Member
|
|
Member
Joined: Nov 2006
Posts: 264 |
Lee
|
|
|
|
|
Joined: Feb 2005
Posts: 598 Likes: 4
Member
|
|
Member
Joined: Feb 2005
Posts: 598 Likes: 4 |
On the IPS they brought in command 15210 which I believe restricted display of my line on dterms but I have never tried it, so I don't know what would be displayed if you used it.
|
|
|
|
|
Joined: Nov 2006
Posts: 264
Member
|
|
Member
Joined: Nov 2006
Posts: 264 |
R+Z
Cmd 15210 control the display of my line on idle state..."on hook" and this not my problem...the problem is when you hang off that is you lift the handset ,immediately "operator" is displayed on the screen instead of my line...and what ever number is dialed "operator" is displayed on both calling and called digital telephones..!!!!
Lee
|
|
|
|
|
Joined: Mar 2014
Posts: 365
Member
|
|
Member
Joined: Mar 2014
Posts: 365 |
Check CMD 15071. 0 = attendant position for DTerms. It should be set to 1 for all non attendant DTerms.
|
|
|
|
|
Joined: Nov 2006
Posts: 264
Member
|
|
Member
Joined: Nov 2006
Posts: 264 |
helpifican
the setting for cmds 15071 and 15073 is (1) for the non multiline Attendant Dterms.
Last edited by Lee07; 11/20/14 02:36 PM.
Lee
|
|
|
|
|
Joined: Mar 2014
Posts: 365
Member
|
|
Member
Joined: Mar 2014
Posts: 365 |
This almost sounds like operator was programmed in as the name for every phone. Have you checked CMD 770?
|
|
|
|
|
Joined: Nov 2006
Posts: 264
Member
|
|
Member
Joined: Nov 2006
Posts: 264 |
yes, and nothing is set for 770.
Lee
|
|
|
|
|
Joined: Mar 2014
Posts: 365
Member
|
|
Member
Joined: Mar 2014
Posts: 365 |
I have never run across this issue. Whenever I run into an unusual issue I go back to basics. There are quite a few entries in CMD 08 that can be flagged that have no definition. I have fixed some unusual issues by going through CMD 08 with an open CMD manual and check to see if anything not defined in the manual is set to 1 (default).
|
|
|
|
Forums84
Topics94,518
Posts639,974
Members49,850
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (justbill, sbdcomm),
301
guests, and
49
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
