|
|
Joined: Feb 2012
Posts: 13
Member
|
|
Member
Joined: Feb 2012
Posts: 13 |
I have currently 4 lines, all on one line card. I added 3 more (ATT Home Wireless) on a second line card. I activated it over cmd 5xx. Outgoing calls work without a problem. On incoming calls it works (rings on console) with first number (new) but other 2 numbers (new) do not ring at console. It does light up on trunk card.
Thank you for your help.
-marc
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2005
Posts: 15,397 Likes: 18
Moderator-Vertical, Vodavi, 1A2, Outside Wire
|
|
Moderator-Vertical, Vodavi, 1A2, Outside Wire
Joined: Jan 2005
Posts: 15,397 Likes: 18 |
The only thing that I can think of is to make sure that the polarity is correct on all of the lines. Trunks on Mitel ports are polarity sensitive.
Ed Vaughn, MBSWWYPBX
|
|
|
|
|
Joined: May 2005
Posts: 1,006
Member
|
|
Member
Joined: May 2005
Posts: 1,006 |
Sounds like a 50. Check each trunk in cmd 5xx reg 4. If polarity was the issue you would be getting alarms. What are the trunk equipment numbers? Can you direct trunk access them each?
|
|
|
|
|
Joined: Feb 2012
Posts: 13
Member
|
|
Member
Joined: Feb 2012
Posts: 13 |
The only thing that I can think of is to make sure that the polarity is correct on all of the lines. Trunks on Mitel ports are polarity sensitive. I checked the polarity and changed to check, but problem is still there. I even just to check changed the polarity on the working line and everything kept on working on that line, it still rings. Sounds like a 50. Check each trunk in cmd 5xx reg 4. If polarity was the issue you would be getting alarms. What are the trunk equipment numbers? Can you direct trunk access them each? This is my 5xx reg 4 - 40530010000. Not getting alarms. Not working one is a LS/GS Trunk Card (MPD) 9104-030-025 and working one is LS/GS Trunk Card 9104-030-100-SA. I can direct access each trunk. I changed the 3rd line and attached it to the 4th line on the 9104-030-025 trunk and it started to work. I even changed the cord from one trunk card (9104-030-025) to the other (9104-030-100-SA) and all lines work in and out going. To me it seems that the card might be defective.
|
|
|
|
|
Joined: Feb 2006
Posts: 1,716
Member
|
|
Member
Joined: Feb 2006
Posts: 1,716 |
Swap the cards. That will tell you immediately if the card is defective.
Rcaman
Americom, Inc.
Where The Art And Science Of Communications Meet
|
|
|
|
|
Joined: May 2005
Posts: 1,006
Member
|
|
Member
Joined: May 2005
Posts: 1,006 |
|
|
|
|
|
Joined: Feb 2012
Posts: 13
Member
|
|
Member
Joined: Feb 2012
Posts: 13 |
Swap the cards. That will tell you immediately if the card is defective.
Rcaman I swapped the card and the card seems to be defective.
|
|
|
|
Forums84
Topics94,518
Posts639,974
Members49,849
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
192
guests, and
40
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
