|
|
Joined: Aug 2009
Posts: 42
Member
|
Member
Joined: Aug 2009
Posts: 42 |
Customer had it. Now its gone.
Admin Programming says it is enabled for Button 20
All other phones have Pool (LG1) as Button 20.
This phone shows 20OPEN
It will not let me put a LG button back on there. Just get a fast busy.
Tried putting a Speed Dial to 801 and same fast busy.
Feature works as if I change it to OFF Hook to a button 13 (Line 1) it will grab that line.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jan 2008
Posts: 3,821
Retired Moderator
|
Retired Moderator
Joined: Jan 2008
Posts: 3,821 |
You can't program a user button for a line, loop, or pool or change one that is already one of the above unless you do it thru admin or enable thru admin for a user to do it. This is done in flash 51 programming...
www.myrandomviews "Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about" Retired, taking photographs and hoping to fly one of my many kites.
|
|
|
|
Joined: Aug 2009
Posts: 42
Member
|
Member
Joined: Aug 2009
Posts: 42 |
I was in Flash 50 Programming. It would allow me into programming as I was using the "Display" to see what everyone's buttons were programmed as.
|
|
|
|
Joined: Jan 2008
Posts: 3,821
Retired Moderator
|
Retired Moderator
Joined: Jan 2008
Posts: 3,821 |
801 is a trunk group access code, so I don't really understand your speed dial programming problem, speed dials as a rule just need the outside number without any access code. Pool programming code is 3 plus group number 01,02,03, etc not the full dial code such as 801, 802 etc.
www.myrandomviews "Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about" Retired, taking photographs and hoping to fly one of my many kites.
|
|
|
|
Joined: Aug 2009
Posts: 42
Member
|
Member
Joined: Aug 2009
Posts: 42 |
So the correct steps at "enter button data" should be
20-3-01-Hold. This would put a Pool button for LG1 back on button 20.
Since button is currently listed as 20Open there should be nothing blocking this feature.
|
|
|
|
Joined: Jan 2005
Posts: 15,395 Likes: 17
Moderator-Vertical, Vodavi, 1A2, Outside Wire
|
Moderator-Vertical, Vodavi, 1A2, Outside Wire
Joined: Jan 2005
Posts: 15,395 Likes: 17 |
Ed Vaughn, MBSWWYPBX
|
|
|
Forums84
Topics94,512
Posts639,933
Members49,844
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
132
guests, and
33
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|