|
|
|
|
Joined: Sep 2004
Posts: 17
Member
|
|
Member
Joined: Sep 2004
Posts: 17 |
I know this post is old, but I have a question directly related to this option: Something weird happens when I add our area code to a number. Our area code is 601. If I add 6015551212 to CLI table 1 the system always dials out our primary PRI number. If I add 015551212 it will dial out as "015551212". If I add 1212 it will dial out "1212". Everything works UNLESS I put the "6" in 601. The full 10 digits makes the system revert back to primary number. I have been battling this for over a year and cannot figure it out. Any ideas? It works the same in CLI Table 2, 3 and 4.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2006
Posts: 3,004 Likes: 4
Moderator-Samsung
|
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,004 Likes: 4 |
The number of digits you need to send via the clip tables depends on you PRI settings, specifically the Number type and Number Plan.
The country/area code setting may have a bearing on this as well, though usually this only affects incomming CLI
|
|
|
|
|
Joined: Sep 2004
Posts: 17
Member
|
|
Member
Joined: Sep 2004
Posts: 17 |
It worked at one time and I cannot remember when it changed. I did have 601 in the area code section of system options but removed it to test. Nothing changed
|
|
|
|
Forums84
Topics94,518
Posts639,976
Members49,850
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
304
guests, and
33
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
