|
|
|
|
Joined: Mar 2009
Posts: 4
Member
|
|
Member
Joined: Mar 2009
Posts: 4 |
Just wondering how to program the network settings for a 550-8600 (no display). It did start and work, but it is using DHCP. I am used to the 550-8662s. I usually do it from the phone (hold 7&8 on power up).
Thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2010
Posts: 797
Moderator-Inter-Tel
|
|
Moderator-Inter-Tel
Joined: Jun 2010
Posts: 797 |
You have to program it via the web interface. You can browse directly to the IP of the phone. It will prompt you for a username and password that we are not allowed to give in the open forums. You may be able to ask your vendor for it or whoever you bought the phone from. If you are unsure of the IP address, there are a couple of different ways you can try to determine it.
1. Look in the ARP tables and compare the IP addresses found with the MAC address of the phone in question.
2. Unplug the phone and run an IP scan on the network. Plug the phone back in and once it is up, scan the network again. Compare the results to find the IP of the phone.
|
|
|
|
|
Joined: Dec 2008
Posts: 87
Member
|
|
Member
Joined: Dec 2008
Posts: 87 |
Is the IP 8600 phone Gigabit?
Also, does it have a port for the PC to connect?
|
|
|
|
Forums84
Topics94,515
Posts639,961
Members49,847
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
