sundance-communications.com/forum Forums TDM Business Telephone Systems Samsung Telephones & Systems Sofware package for boot file needed OS7030

I think i need a bit of software with a new boot file so i can recover the OS7030
the boot file i have on the 7030 is bt30v440.bin and i think may be corrupt can anyone send me a new one so i can try the recovery procedure ??

thanks for the help

What makes you think the boot file is corrupt?

The boot file is stored on a EEPROM chip, so if its corrupt you won't be able to recover the system unless you have a working replacement chip or a EEPROM programmer with the boot file to re-program the suspect chip.

It's most likely your software image files that are corrupt (recovered a few cabinets due to this).

Hook up the sio cable and see what output you get

I'm not sure but it mentioned something about a boot file ending in .bin
In a document I have on how to recover a 7030 but I'm still a bit stuck I have the serial cable setup and I have the latest 4.60b software on my laptop
If you could go through the steps I'd be gratefull thanks

Hiiiii

pls send to me Sofware package for boot file needed OS7030 v4.53

THANKS

I will require your email address to send the file(s) to you.

Please provide one (you can PM me if you wish), or update your profile so it contains one.

Thanks

PLS. send file to ([email protected])

THANKS.....for your coop.

Got the same problem trying to recover an OS7030, can log onto it with a terminal program and tftpd32 through the sio port, I can watch the system cycle through trying to boot and fail to start, I've got all the software packages from 4.30 up but none of them include the boot file bt30v440.bin to reload with the recovery procedure

The bt30v440.bin file is a separate download as its not really needed on updates. I have made a guide that i sent out to my engineers to use on site to recover 7030's. The boot file isn't really needed like nameless said. If you want i can send you the bootfile if i can find it?

I found and downloaded a copy of the .bin file and have the system booted back up and running again but without VM prompts so I'll have to go through it again to upload the VM folder, I wasn't doing an upgrade I was doing a recovery from corrupt files but I think your right I don't think I needed the .bin file I could see the boot file version in the system as it was booting and it probably wouldn't have been booting if it wasn't there or was corrupted as well. I had to change the names of the drXXXX.pkg, csXXXX.pkg and msXXXX.pkg files in the boot sequence to match the files I uploading from the software package folder so it would look for the correct files

pls send to me Sofware package for boot file v4.53
[email protected]