|
|
|
|
Joined: Nov 2002
Posts: 66
Member
|
|
Member
Joined: Nov 2002
Posts: 66 |
I had a document from Vertical Wave wiki that told how to configure a Linksys ata as a 3rd party sip phone on the Wave. Wave wiki site is now off line. Did anyone save this document?
Thanks in advance. Scott
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Nov 2002
Posts: 66
Member
|
|
Member
Joined: Nov 2002
Posts: 66 |
I never found the instructions. I figured out how to program it through trial and error. No thanks to Vertical or Cisco! It would be so nice if since SIP is a standard that manufactures would use the same terminology.
|
|
|
|
|
Joined: May 2013
Posts: 4
Member
|
|
Member
Joined: May 2013
Posts: 4 |
Can you posted some screen shots I'm trying to get a Linksys PAP2 for a customer to work again I had it running for 3 years and over a year ago I moved them to 4.5 and the analog gateway quit working so I had to disable the SIP registration and it started working again, I added the last set of GHF and it broke again. I have a SPA112 and (2) Linksys SPA8000 which I cannot get registered to the WAVE IP2500 4.5 with all the hot fixes loaded.
Randy Daubendiek
|
|
|
|
Forums84
Topics94,515
Posts639,966
Members49,848
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
