DSX 40 MOH Question|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

DSX 40 MOH Question #590287 06/17/15 06:26 AM
Joined: Aug 2002 Posts: 2,608 Albany, N.Y. USA upstateny OP Moderator-ESI, Shoretel
OP upstateny Moderator-ESI, Shoretel Joined: Aug 2002 Posts: 2,608 Albany, N.Y. USA	I proposed a new system to a business last week and they want to wait a bit but want to replace their MOH player. Right now they have a Bogen FM Receiver and it gets horrible reception. I bought a Premier player for them. Any chance i can just swap them out? John Corrigan New Phone Systems and Service

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: DSX 40 MOH Question upstateny #590294 06/17/15 10:19 AM
Joined: Jan 2004 Posts: 6,648 Sarasota FL skip555 RIP Moderator-Nisuko-Tie, General
skip555 RIP Moderator-Nisuko-Tie, General Joined: Jan 2004 Posts: 6,648 Sarasota FL	Should just be plug and play , John . If MOH is already there the programming is correct and its plugged in correctly . the only possible issue is the correct cable Skip ------------------------------------ Serving SW and West central Fl since 1984

Re: DSX 40 MOH Question upstateny #590322 06/17/15 09:22 PM
Joined: Jun 2010 Posts: 72 West Monroe LA techguy0802 Member
techguy0802 Member Joined: Jun 2010 Posts: 72 West Monroe LA	If I am not mistaken all you should need is a 1/8 mini mono cable for the phone system side and if programming is still good like skip said you should be good to go. Jules B Chauvin J & K Telecom LLC. 101 Parkwest Drive Ste 4 West Monroe, LA. 71291 (318)582-2515

Re: DSX 40 MOH Question skip555 #590331 06/18/15 07:20 AM
Joined: Aug 2002 Posts: 2,608 Albany, N.Y. USA upstateny OP Moderator-ESI, Shoretel
OP upstateny Moderator-ESI, Shoretel Joined: Aug 2002 Posts: 2,608 Albany, N.Y. USA	Originally Posted by skip555 Should just be plug and play , John . If MOH is already there the programming is correct and its plugged in correctly . the only possible issue is the correct cable Thanks Skip - my only concern was the NEC manual referring to 10 ohms and the Premier device mentioned 8 or 600. All went well. John Corrigan New Phone Systems and Service

Re: DSX 40 MOH Question upstateny #590336 06/18/15 09:41 AM
Joined: Apr 2005 Posts: 2,503 Likes: 2 St. Louis, Mo 63025 dans Member
dans Member Joined: Apr 2005 Posts: 2,503 Likes: 2 St. Louis, Mo 63025	use the 600 ohms output. We get old too soon, smart too late

Moderated by ttech

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems NEC Telephones & Systems DSX 40 MOH Question