|
|
Joined: Feb 2014
Posts: 5
Member
|
OP
Member
Joined: Feb 2014
Posts: 5 |
I have an OS7200 PBX system, i connected a GSM terminal to trunk port to act as a co-line for my office but it shows no clip info when the gsm number is called. so i tried it on an OS7030 and did all the configuration that is MMC 414 to set cli trunk on, and mmc 110 to set ringing display on line 1 to CLI number first. is there any other thing i can do to get my caller ID showing?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jun 2005
Posts: 574
Member
|
Member
Joined: Jun 2005
Posts: 574 |
Have you made trunks in mmc 425 to except cli
|
|
|
|
Joined: Sep 2001
Posts: 2,330 Likes: 7
Moderator-Executone-Isoetec, Samsung
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,330 Likes: 7 |
Try 312.It's hard to say exactly because you aren't in the same country as us but in North America you would need to look at 414 to set trunks 312 to allow stations
|
|
|
|
Joined: Jun 2006
Posts: 3,004 Likes: 4
Moderator-Samsung
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,004 Likes: 4 |
You will also need a rcm2 daughter card installed on the mp20 or mcp card, and have it configured for cid.
The os7200/os7400 don't have built-in cid decoders
|
|
|
|
Joined: Feb 2014
Posts: 5
Member
|
OP
Member
Joined: Feb 2014
Posts: 5 |
Thanks a lot all, the rcm2 card i think is the problem i will get one and install it then i will update the house. Thanks again
|
|
|
Forums84
Topics94,309
Posts638,906
Members49,771
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Toner),
148
guests, and
143
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|