|
Joined: May 2008
Posts: 523
Member
|
OP
Member
Joined: May 2008
Posts: 523 |
I am trying to set a headset key on one of the phones.
I press Spd Spd, they key, and then 634 for headset.
Does work, no confirmation tone either.
Could the feature have been renumbered?
How can I check?
Just dialing 634 doesn't put the phone in headset mode either.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jan 2008
Posts: 3,821
Retired Moderator
|
Retired Moderator
Joined: Jan 2008
Posts: 3,821 |
You can't program a headset button until the speakerphone function is set for "disabled" in flash 50/51 programming.
www.myrandomviews "Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about" Retired, taking photographs and hoping to fly one of my many kites.
|
|
|
|
Joined: May 2008
Posts: 523
Member
|
OP
Member
Joined: May 2008
Posts: 523 |
Thanks, Derrick.
Could you give me the keystrokes and buttons for that?
|
|
|
|
Joined: Jan 2008
Posts: 3,821
Retired Moderator
|
Retired Moderator
Joined: Jan 2008
Posts: 3,821 |
The speakerphone can be programmed to work in one of three ways: - Normal speakerphone operation. -Disabled for outgoing and incoming CO calls, but handsfree on intercom allowed. -Headset operation allowed. Use Flash 50 programming when you want to modify a range of stations’ attributes using fixed station numbers. Use Flash 51 programming to modify a single station’s attributes using a flexible station number. Programming Steps 1. Press FLASH and dial [50] or dial [51]. Flexible button #24 (New Range) is lit and one of the following messages displays: DISCONNECT SPK CALL 0-1 DISABLED Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers STATION ATTRIBUTES SELECT A STATION RANGE ENTER STATION NUMBER Enter the range of fixed station numbers (100-419) to be programmed. If only one station is being programmed, enter that number twice, e.g., [100 100]. -or- Enter a valid flexible number (100-8999) to be programmed. 3. Press HOLD to save the entry. A confirmation tone sounds and the display updates. Flexible button #19 is lit. The display updates to reflect current programming for Page A: 4. Press button #20. The display updates to reflect current programming for Page B. 5. Press the SPEAKERPHONE flexible button (Button #4). The following message displays: 6. Enter a valid number (0-4) on the dial pad to identify the speakerphone operation. [0]= Works as normal speakerphone. Full speakerphone capabilities on CO lines and Intercom. [1] = Speakerphone enabled for intercom calls only. Speakerphone capabilities disabled for outgoing CO line calls (monitoring and on-hook dialing are still permitted). [2] = Permits toggling of speakerphone and headset operation via the [634] Headset code. [3] = Forces the telephone to always ring in the tone intercom mode. [4] = Forces the telephone to the hand-free intercom mode always. 7. Press HOLD to save the entry. A confirmation tone sounds. DEFAULT … All stations are assigned an ID of 0 (Full Speakerphone).
Last edited by Derrick; 07/14/15 07:21 AM.
www.myrandomviews "Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about" Retired, taking photographs and hoping to fly one of my many kites.
|
|
|
|
Joined: May 2008
Posts: 523
Member
|
OP
Member
Joined: May 2008
Posts: 523 |
Thanks, Derrick,
You're a prince!
|
|
|
Forums84
Topics94,297
Posts638,858
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
145
guests, and
251
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|