|
|
|
|
Joined: Jan 2008
Posts: 195 Likes: 3
Member
|
|
Member
Joined: Jan 2008
Posts: 195 Likes: 3 |
I am sure that over the years, I have set this up before on an XTS, but for some weird reason, I can not get the Viking Call Box to hang up successfully on SLIBE. The call box light goes out, but just open silence when monitoring the port. I have to unplug the callbox to clear the line.
The call box works fine on an POTS so the box itself is good. I am going to try swapping out the SLIBE and see if it is the card, but checking if anyone has had a similar issue or recommendation. May adjust the hook flash timer/bounce timer to see if maybe the system is not getting what it needs from the call box.
Last edited by cswroe; 09/03/15 07:12 AM.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2008
Posts: 3,821
Retired Moderator
|
|
Retired Moderator
Joined: Jan 2008
Posts: 3,821 |
I suggest you check out the extension with a test set before you go thru all the trouble of swapping out a card. I suspect you need to program the silence timer for the E-35 or one of the other disconnect options resident in the E-35. Call boxes don't bounce the "handset" unless someone hits a button really quick and that is unlikely to happen fast enough to put the analog extension on hold.
www.myrandomviews "Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about" Retired, taking photographs and hoping to fly one of my many kites.
|
|
|
|
Forums84
Topics94,543
Posts640,070
Members49,857
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
