|
|
|
|
Joined: Nov 2003
Posts: 1,310
Member
|
|
Member
Joined: Nov 2003
Posts: 1,310 |
Client has an MICS in their building and has built a new warehouse 1000' away, connecting the two with a buried 2" conduit. Will digital sets sync that far over 25pr. DB?
Last edited by Danny_Ocean; 09/08/15 09:58 PM.
D. Ocean
Miami, FL
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Nov 2003
Posts: 1,310
Member
|
|
Member
Joined: Nov 2003
Posts: 1,310 |
...and will a SAPS work on T7316E's? I've only used them on M-Series to power the CAPs.
D. Ocean
Miami, FL
|
|
|
|
|
Joined: Feb 2005
Posts: 1,615
Member
|
|
Member
Joined: Feb 2005
Posts: 1,615 |
1000 feet should be ok to work.
If not then double up digital pairs to the feed and all the way to the jack where both meet up again onto the red and green terminals ( or W/B)
Don't forget a 4 conductor cord.
If still does not work then install a SAP in the far end closet.
You can loop the SAP up to 3 sets on the orange pairs.
|
|
|
|
|
Joined: Nov 2003
Posts: 1,310
Member
|
|
Member
Joined: Nov 2003
Posts: 1,310 |
Great, thanks as always.
D.O.
D. Ocean
Miami, FL
|
|
|
|
|
Joined: Jul 2005
Posts: 1,829
Member
|
|
Member
Joined: Jul 2005
Posts: 1,829 |
ive heard you can go up to 2000 ft
|
|
|
|
|
Joined: Jan 2009
Posts: 854 Likes: 1
Member
|
|
Member
Joined: Jan 2009
Posts: 854 Likes: 1 |
I have run digital sets off of a MICS approximately 5 city blocks with no issue. 1000' should be fine. Just make sure you have good protection on both ends.
|
|
|
|
Forums84
Topics94,515
Posts639,962
Members49,847
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
125
guests, and
39
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
![[Linked Image from telcopc.ca]](https://telcopc.ca/files/pics/small-logo-sig.png){kind=logo}
