sundance-communications.com/forum Forums TDM Business Telephone Systems Samsung Telephones & Systems IP NETWORK FAILURE RESPONSE

Not familiar with LIM cards but it sounds like they aren't a hub and don't support port mirroring so you will not see the SIP traffic.

The LIM card was released with the OS7200, it is a 16 port 10/100 dumb switch.
There is a PLIM which is the same as the LIM except PoE.
The LIM and PLIM cards can become managed switches with the addition of the WIM card.
The OS7400 introduced the GPLIM and GSIM and GSIM-T cards which are a 10/100/1000 version of the PLIM, and were also managed, the GSIM-T card has GBIC modules for connection of Fiber Optic.

I will have a look at your download shortley

I'm curious nameless, can you port mirror with those? I've only run across the 4 port POE cards that go on an MP10. Looks like in the US we only have (had) the PLIM, PLIM2, WIM, GSIMT, and the GPLIMT.
* Never mind. It's in a separate manual and I see the port mirroring, ours is called the 7200 Data Server.

Never heard of PLIM2, we never sold any of the modules.

A company my work purchased sold a few PLIM cards.

The problem is that the MP and MGI/OAS cards don't communicate via the back plane to the LIM cards, so you have to patch them into it or uplink them all to the customers switch.

I've never rtfm about the lim cards, that's only what i know from the 7200 install manual and talking to samsung.

The GSIM and GPLIM are routers as well I believe.

is there somewhere on the Officeserv ver 4.75 and higher where i can whitelist IP of PC running portscanner because what I see from attachments below is that port 5060 is closed.

Try setting your Comm Exclusive in SIP options to RESPOND.

s there somewhere on the Officeserv ver 4.75 and higher where i can whitelist IP of PC running portscanner because what I see from attachments below is that port 5060 is closed.

https://drive.google.com/open?id=0B51rW_xmSuc1Qk1QcjRzV0ppVkU
https://drive.google.com/open?id=0B51rW_xmSuc1SnV6SUZNSGxFOE0

You must set the private w/ public and put in the proper ip address information in 830. So that it will recognize incoming requests. Have you done this?