|
|
Joined: Apr 2008
Posts: 4
Member
|
Member
Joined: Apr 2008
Posts: 4 |
I am looking to connect our Inter-Tel Axx 9.0 to our IVR. We have 4 T1 cards.
Can I use the serial ports on the T1 cards in some way? Or the serial ports on the CPC card. Or do I need a seperate T1 card?
I will be connection to a Dialogic card in our IVR. If I need an addition card, can it just be connected directly to the Dialogic?
Thanks, yanky
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Dec 2006
Posts: 93
Member
|
Member
Joined: Dec 2006
Posts: 93 |
I believe you are going to need s single line card, then you can connect your dialogic card to the single line ports.
|
|
|
|
Joined: Dec 2002
Posts: 9,429 Likes: 3
Member
|
Member
Joined: Dec 2002
Posts: 9,429 Likes: 3 |
The serial ports are only for RS232, to program the cards from a computer. You would need an SLC to connect to the Dialogic cards.
Jeff Moss Moss Communications Computer Repair-Networking-Cabling MBSWWYPBX, JGAE
|
|
|
|
Joined: Apr 2008
Posts: 4
Member
|
Member
Joined: Apr 2008
Posts: 4 |
So I would come off the SLC(16 ports) from the amphenol cable to what?(a block cable terminator?) And then into the dialogic 24 port card? BTW, we are in the planning/proof of concept stage before we move forward.
Thanks, yanky
|
|
|
|
Joined: Dec 2002
Posts: 9,429 Likes: 3
Member
|
Member
Joined: Dec 2002
Posts: 9,429 Likes: 3 |
You would need to connect the 25 pair cable to a 66 block. Then you would run cables to the Dialogic card. I would assume it uses 4 pin or 8 pin modular jacks.
Jeff Moss Moss Communications Computer Repair-Networking-Cabling MBSWWYPBX, JGAE
|
|
|
|
Joined: Apr 2008
Posts: 4
Member
|
Member
Joined: Apr 2008
Posts: 4 |
OK... I think I am getting it... I would need a Dialogic Analog card, not a T1 card? So we are going slc to analog. Any way to go Inter-tel T1 to Dialogic T1?
yanky
|
|
|
|
Joined: Dec 2002
Posts: 9,429 Likes: 3
Member
|
Member
Joined: Dec 2002
Posts: 9,429 Likes: 3 |
I am not sure, you might be able to do it using a T1 crossover cable. I would call up your Inter-Tel dealer, assuming you have one.
Jeff Moss Moss Communications Computer Repair-Networking-Cabling MBSWWYPBX, JGAE
|
|
|
Forums84
Topics94,532
Posts640,045
Members49,853
|
Most Online5,661 May 23rd, 2018
|
|
|
|
|