|
|
|
|
Joined: Mar 2004
Posts: 488
Member
|
|
Member
Joined: Mar 2004
Posts: 488 |
HI
I was wondering if anyone else that is using a Fluke, if they are getting a fail that says unknown fault. Don't know how to fix
Any ideas would help
We are using General cable and Hubbell jacks so its not cheap off shore stuff
Thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2008
Posts: 3,821
Retired Moderator
|
|
Retired Moderator
Joined: Jan 2008
Posts: 3,821 |
I suggest you try a different tester. It sounds like an internal problem with the tester.
www.myrandomviews "Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about" Retired, taking photographs and hoping to fly one of my many kites.
|
|
|
|
|
Joined: Jan 2013
Posts: 522 Likes: 1
Member
|
|
Member
Joined: Jan 2013
Posts: 522 Likes: 1 |
What are you trying to test? Cat5E, Cat6, or Cat6a? When does it give you the error message? Before, during or after the test.
Patrick T. Caezza
Santa Paula, CA 93060
C-7 - Low Voltage System Contractor - Lic# 992448
|
|
|
|
|
Joined: Mar 2004
Posts: 488
Member
|
|
Member
Joined: Mar 2004
Posts: 488 |
HI
sorry a little shy on info
Testing cat 6. The run fails and that is cause on the failure
|
|
|
|
|
Joined: Jan 2013
Posts: 522 Likes: 1
Member
|
|
Member
Joined: Jan 2013
Posts: 522 Likes: 1 |
Do other runs pass? If you're only checking this run just grab a long patch cable and test it for comparison.
Patrick T. Caezza
Santa Paula, CA 93060
C-7 - Low Voltage System Contractor - Lic# 992448
|
|
|
|
Forums84
Topics94,515
Posts639,948
Members49,847
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
246
guests, and
28
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
