|
|
|
|
Joined: Feb 2015
Posts: 7
Member
|
|
Member
Joined: Feb 2015
Posts: 7 |
We just got a device to play a custom message and on hold music. It has two RCA outputs on it. One is 8 OHMS 3W the other is 600 OHMS. I have two questions;
1) Am I correct in thinking that I will hook to the 600 OHMS output
2) I found on here that Pins 3 & 6 are supposed to be used for MOH on my ECS. Which pin do I wire to the different connectors of the RCA connector.
-Thanks
Last edited by MaxxTek; 11/20/15 02:15 PM.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2006
Posts: 1,813 Likes: 15
Moderator-Iwatsu
|
|
Moderator-Iwatsu
Joined: Aug 2006
Posts: 1,813 Likes: 15 |
Use the 600 ohm input, but turn the potentiometers all the way down before you connect the source.
The RCA plug really has only two connection points. Since you're not worried about external speakers battling out of phase, connect the inside/plug connector to pin 2, the outside/ring connector to pin 5 for MOH
Connect the source to pins 3 and 4 for BGM
Pins 1 and 6 are used for a trigger if your MOH equipment requires a trigger.
Sometimes the thoughts in my head get so bored, they go for a stroll through my mouth. This is rarely a good thing.
|
|
|
|
Forums84
Topics94,565
Posts640,180
Members49,869
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (KRRath),
28
guests, and
66
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
