web statisticsweb stats

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
#597294 01/22/16 08:21 PM
Joined: Jan 2002
Posts: 462
Member
Member
Offline
Joined: Jan 2002
Posts: 462
Just finished installing a IP Office configured as a Partner (Right after Christmas) Went into files-preferences and unchecked default to standard mode did a save to basic, machine came up and doing what it was meant to do. operate as a basic Partner. It has 2 incoming lines and 4 stations 2 1416 and 2 1408 Ext 10 11 12 13 Last week I get a call machine acting weird. Can make out going calls and receive incoming calls. This is the weird part on sta 10 and 11 displays there is a soft key that says status when I push that key and the down arrow I get memory failure, expansion failure, voice mail failure, voice mail full, voice mail almost full lic service failure and system boot failure. The sd card was seated correctly had two green lights on back of unit. Tried reboot N/G Tried a upgrade N/G The IP shows no alarms and is working just baffled by what appears on the display. Rel is 9.1.0 Any one have any suggestions. Almost sounds like it got stuck in limbo between a Basic and a preferred system in original set up.

Avaya IP Office Help & Support Website
IP Office Help

Avaya IP Office Help & Support Website


FAQs, documentation, videos, updates, and support for the Avaya IP Office business phone system!
Everything you need to know about installing, upgrading, and troubleshooting IP 500v2 and IPO Server Edition systems.

Joined: Jan 2002
Posts: 462
Member
Member
Offline
Joined: Jan 2002
Posts: 462
Anyone know where I might be able to get an answer or help on the above situation The company that we got the equipment has no idea whats causing this. Just keeps telling us to do different things and we do what they tell us and nothing seems to work. They are sending a new sd card but the old one test good with the card reader. Thanks Tony

Joined: May 2002
Posts: 4,309
Likes: 8
Moderator-Avaya, Polycom
*****
Moderator-Avaya, Polycom
*****
Joined: May 2002
Posts: 4,309
Likes: 8
Tony, IP partner edition is ment to work with Partner Phones. I think that maybe your problem. The 1400 sets are not happy with Partner Edition.

Joined: Jan 2002
Posts: 462
Member
Member
Offline
Joined: Jan 2002
Posts: 462
Hitech, Ive put in a few of these with partner edition and always used 1400 type phones, this is the first time i ran ito this problem. But its the first one with 9.1.5 Thanks

Joined: May 2002
Posts: 4,309
Likes: 8
Moderator-Avaya, Polycom
*****
Moderator-Avaya, Polycom
*****
Joined: May 2002
Posts: 4,309
Likes: 8
I've never had luck with them in Partner mode. Just wondering, why do you do that.

Joined: Jan 2002
Posts: 462
Member
Member
Offline
Joined: Jan 2002
Posts: 462
Hitech, we deal with the small end customer that really doesnt need or the BS on the phones It rings pick it up, transfer the call or yell across the romm to pick up line such and such. Ive had good luck so far with the little basic and also if i keep the old sets the customer wants to know why are you changing the brains of the unit I still have the old sets The one thing they like is the idea that that have the ability to have AA and voice mail if they want. Tony

Joined: May 2002
Posts: 4,309
Likes: 8
Moderator-Avaya, Polycom
*****
Moderator-Avaya, Polycom
*****
Joined: May 2002
Posts: 4,309
Likes: 8
Basic does that better then Partner

Joined: May 2002
Posts: 4,309
Likes: 8
Moderator-Avaya, Polycom
*****
Moderator-Avaya, Polycom
*****
Joined: May 2002
Posts: 4,309
Likes: 8
Unless you use Partner sets you should use Basic

Joined: Jan 2002
Posts: 462
Member
Member
Offline
Joined: Jan 2002
Posts: 462
Hitech, thanks for the input never heard that before guess i'll have to dig a little deeper and see what comes up thanks again Tony

Joined: Feb 2005
Posts: 12,354
Likes: 4
Member
***
Member
***
Offline
Joined: Feb 2005
Posts: 12,354
Likes: 4
I thought Basic was Partner. And Partner should support 1400 series phones.

-Hal

Page 1 of 2 1 2

Link Copied to Clipboard
Newest Topics
Samsung xchange server
by scanjet - 04/07/25 06:37 PM
NEC IP Phones
by juno - 04/04/25 09:05 AM
NEC IP phones rebooting
by jpet621 - 04/03/25 03:03 PM
SV9100 store hours mailbox
by muddybl - 04/03/25 02:10 PM
Forum Statistics
Forums84
Topics94,513
Posts639,939
Members49,844
Most Online5,661
May 23rd, 2018
Newest Members
yeloshak, ty3995, Sippy, sersmith, Taddeo
49,844 Registered Users
Top Posters(30 Days)
Toner 8
Taddeo 6
dexman 3
C5Z 2
Who's Online Now
0 members (), 179 guests, and 41 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998 - 2025
Powered by UBB.threads™ PHP Forum Software 8.0.0