sundance-communications.com Forums Telephony Discussion Phone & VoIP Systems NEC Telephones & Systems Please Help!--Capability Exceeded

Hello all--thank you in advance for any help you might be able to provide. I have a customer with a system that is a NEC Aspire M with a networked Aspire S. The customer has a 16 port VOIP card installed--I have tried everything I can think of and still cannot seem to add any VOIP phones. The error message on the phone display keeps coming up as Capability Exceeded. I have searched online and in the manual and understand that there is a relationship between port assignment and extension, but nothing seems as it should. All MLT phones are working properly, as is everything but the VOIP phones. I have the VOIP card in slot 7 and have programmed the card to the proper IP address (I think). Any help from NEC is out since they won't support this system anymore and I desperately need to get this going for them. Any help would be most appreciated. If there is information that is lacking in this post, please let me know and I will hunt it down and relay it.

Thank you again to those of you out there helping the rest of us poor saps.

--AlliedCo

Aspire M can only support 64 ports. I think you also have to license the VOIP phones. But I would check ports first.

The Aspire M has 64 available ports - how many are you using for trunks and MLTs? If you have exceeded your port limit, you can expand to 512 ports by adding the PAL feature upgrade chip. There is no licencing beyond that.

VoIP ports do need to be assigned, and how the phones are set up depends on what kind of IP phones you are using. Aspire IP phones are not SIP.

If you are using SIP phones, make sure your software is at the most current release.

I have the same scenario - Aspire M networked to an Aspire S at another site - plus a number of Aspire IP sets connected to the M. So, I know it works to do that.