|
|
Joined: Jan 2011
Posts: 106
Member
|
OP
Member
Joined: Jan 2011
Posts: 106 |
Have had this happen twice with same SIP vendor - Can call in on SIP but cannot call out. SIP vendor says they Invite registration - none is sent from SBX. I am running 4.OAi software and have the VOIB card at 3.0AH firmware. Manipulating entries in the SIP Attrib 2 table is spooky at best. When I got the SIP trunks working again, I deleted my Auth User Name and Password and I could still call out!!! When calls fail the display on the phone shows the elapsed time connected for 4 seconds then error tone. One of the two SBX's is directly on two public IP's off of a Comcast Modem/Router. The other is in our office behind our firewall on two private IP's. Veritcal is scratching their heads - no help. Has anyone out there seen this behavior? Every other dbase entry I have used in the SBX is solid - what you see is what you get. The SIP Attrib 2 table is not stable at all.
|
|
|
|
Joined: Jan 2011
Posts: 106
Member
|
OP
Member
Joined: Jan 2011
Posts: 106 |
Came up with fix - sort of. In VOIP/Gatekeeper, Firewall IP - I changed this to the main public IP of the site. I made a call - it failed. Then I changed the Firewall IP back to the public of the VOIB card - WORKS!!! Why? Dunno.
|
|
|
Forums84
Topics93,833
Posts636,789
Members49,649
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
106
guests, and
14
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|