|
Joined: Jan 2006
Posts: 2,266 Likes: 1
Member
|
OP
Member
Joined: Jan 2006
Posts: 2,266 Likes: 1 |
Is it the same on the IPEdge as it is on the CIX where Polycom's setup as SIP ext. can't initiate conf calls from the Polycom ??
Last edited by Steve Mull; 06/14/16 02:27 PM.
|
|
|
|
Joined: Jun 2005
Posts: 2,654 Likes: 4
Member
|
Member
Joined: Jun 2005
Posts: 2,654 Likes: 4 |
I was told by Toshiba that you can use the SIP Polycom to make a conference call on an IPEdge but I have not tested this. With a CIX there is only 1 talk path per SIP extension, but as a work around you can create 2 extensions in the Polycom on the CIX
|
|
|
|
Joined: Jan 2010
Posts: 933 Likes: 1
Moderator-Toshiba
|
Moderator-Toshiba
Joined: Jan 2010
Posts: 933 Likes: 1 |
If you configure the SIP extension in the IPedge to use more than 1 SIP channel number that should work.
Regards Carl
|
|
|
|
Joined: Jan 2006
Posts: 2,266 Likes: 1
Member
|
OP
Member
Joined: Jan 2006
Posts: 2,266 Likes: 1 |
It worked just setting it up as a SIP ext. comes to find out the customer had some type of conf bridge from Windstream before we put the IPEdge in.
|
|
|
Forums84
Topics93,832
Posts636,785
Members49,648
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
184
guests, and
57
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|