Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Jan 2009
Posts: 822
ffej010 Offline OP
Member
OP Offline
Member
Joined: Jan 2009
Posts: 822
Moved a norstar 3x8 dr5 last week for a customer to a new building. All phones are t7316. In the warehouse area there is one office with one phone. Outside this office is a storage area and a loadout bay. They would like some kind of speaker or horn in both of these areas that woud go off when that phone rings or when someone pages that extension so that it can be heard outside the office. What are some options for this?

Atcom VoIP Demo
VoIP Demo
Joined: Jan 2004
Posts: 6,648
RIP Moderator-Nisuko-Tie, General
*****
Offline
RIP Moderator-Nisuko-Tie, General
*****
Joined: Jan 2004
Posts: 6,648
I've used viking M2W in similar situations

https://www.vikingelectronics.com/product-details.php?pid=185


Skip
------------------------------------

Serving SW and West central Fl since 1984
Joined: Feb 2005
Posts: 1,610
Member
Online Content
Member
Joined: Feb 2005
Posts: 1,610
I like Algo products for the small things like that:
https://www.algosolutions.com/products/audible-and-visual-alerting.html

or Bogen's TPU15 if you want a talk back application which allows up to two speakers if I recall: https://www.bogen.com/products/telephonepaging/
If noisy environment then forget it.


=---()))))))))---=
www.curlycord.com
[Linked Image from telcopc.ca]
Toronto, Canada




Joined: Dec 2003
Posts: 2,086
Moderator-Nortel
Offline
Moderator-Nortel
Joined: Dec 2003
Posts: 2,086
The Viking unit - you need to tear apart the phone, solder in wires off the speaker and run to the unit. Then everything the speaker does is amplified - ringing and if you use speaker phone your conversation. OOOPS ! ! !

I would go with the Algo - connect to the Aux Relay. Make sure nothing else rings the Aux ringer except that phone. Then when that phone rings you hear it. Unless you put it on DND.


If CON is the opposite of PRO
Then what is the opposite of Progress?
Joined: Jan 2009
Posts: 822
ffej010 Offline OP
Member
OP Offline
Member
Joined: Jan 2009
Posts: 822
Would the Algo speaker also come on if someone did an internal page (F610) or a voicecall to that extension?

Joined: Jan 2009
Posts: 822
ffej010 Offline OP
Member
OP Offline
Member
Joined: Jan 2009
Posts: 822
I have taken an 8 ohm speaker and "wired" it into the speaker of the phone before, but am hoping to avoid that this time as they would like two speakers and they would be outside of the room where the phone physically sits now.

Joined: Dec 2003
Posts: 2,086
Moderator-Nortel
Offline
Moderator-Nortel
Joined: Dec 2003
Posts: 2,086
F610 is internal page to all phones. Voicecall is to ONE phone only. If you want sound going ONLY to that phone, NO it will not on the Algo. To get this you would tear apart the phone and use the Viking.

BUT - If you use F630 which is all phones AND external speaker, then wire to the Algo from the phone system will go through the page speaker on the Algo. You may want to contact Algo to see how many speakers you can connect to the Algo. 604.454.3790

I personally would go with one cable from phone system to Algo. One pair to Aux Ring and one pair for page. Then you can make ONLY that one phone ring through the speaker. And using the F630 get the paging through the speaker.
I would not want to tear apart a phone and connect a speaker. First time they forget and use speaker phone everyone can hear the conversation.


If CON is the opposite of PRO
Then what is the opposite of Progress?
Joined: Feb 2005
Posts: 1,610
Member
Online Content
Member
Joined: Feb 2005
Posts: 1,610
You can also go from headset port on the phone to the Algo but keep it at 15 feet tops from the phone....see the manual here: https://www.algosolutions.com/pdf/user_guides/1825_Duet_Plus_Installation_Guide_English.pdf

You could go from headset to Algo then mount Algo beside the sets jack & power receptacle on the wall then run a cable to each additional speaker (or daisy chain)....in this scenario you would set the jumper to turn off the Algo speaker since the remote speakers would be used.
Or mount the Algo just outside the office 15 feet tops from the headset jack to service that area then run additional speakers.







=---()))))))))---=
www.curlycord.com
[Linked Image from telcopc.ca]
Toronto, Canada




Joined: Jan 2004
Posts: 6,648
RIP Moderator-Nisuko-Tie, General
*****
Offline
RIP Moderator-Nisuko-Tie, General
*****
Joined: Jan 2004
Posts: 6,648
Originally Posted by ffej010
I have taken an 8 ohm speaker and "wired" it into the speaker of the phone before, but am hoping to avoid that this time as they would like two speakers and they would be outside of the room where the phone physically sits now.


you can have up to three speakers behind the Viking unit wired out to wherever you need them

for speaker phone use either a toggle switch or unplugging the amp will work .


Skip
------------------------------------

Serving SW and West central Fl since 1984
Joined: Jan 2009
Posts: 822
ffej010 Offline OP
Member
OP Offline
Member
Joined: Jan 2009
Posts: 822
Thanks for the suggestions guys. I'll look into these and get something to go. I like the idea of connecting to the aux ringer on the 3x8 the best.


Moderated by  MooreTel, NTlayoff 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics93,820
Posts636,739
Members49,643
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
Today's Birthdays
Airdale, AnnetteLee, AnnettesDayIsUg, bigboy, Blackline, boomj, db Communications, gwh, samcorcione9111, Victor D.
Newest Members
julesm, Helen.D, AlAl, mike hurford, Nigel S
49,642 Registered Users
Top Posters(30 Days)
pvj 12
ramo 11
Toner 9
dans 5
Who's Online Now
3 members (Curlycord, [email protected], Professor Shadow), 14 guests, and 18 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: Business Phone Systems | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2023
Powered by UBB.threads™ PHP Forum Software 7.7.5