|
|
|
|
Joined: Jan 2008
Posts: 76
Member
|
|
Member
Joined: Jan 2008
Posts: 76 |
Can you put a PRI (RPTU) in any version of this system? Is there a certain software release? Looks like it has to be in slot 108? Presently there is a station card there ...PDKU2. How much of a hassle is it to rearrange everything?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2010
Posts: 937 Likes: 5
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jan 2010
Posts: 937 Likes: 5 |
The PRI card can only fit into an odd number slot so
Base Cab 3,5,7
Exp Cab 1,3,5
(it only fits into 16 port slots and takes up 2 slots)
Regards
Carl
|
|
|
|
|
Joined: Jan 2010
Posts: 937 Likes: 5
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jan 2010
Posts: 937 Likes: 5 |
The only exception is on the CTX100/CIX100 where it can fit into slot 3 and you can use slot 4 as a 8 port slot otherwise slot 5 and 7 in the expansion using both slots again.
Regards
Carl
|
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
The PRI must be in an odd-numbered slot so slot 108 will not work. If there are more than 16 b-channels on the PRI then it will take more than one slot.
Let me advise you that programming a DK for PRI is not easy at all if this is your first time doing it.
|
|
|
|
|
Joined: Jan 2008
Posts: 76
Member
|
|
Member
Joined: Jan 2008
Posts: 76 |
Here is the configuration: First slot 101 is empty. 102-PDKU2, 103-PDKU2, 104 PDKU2, 103-RDSU1, 105-RCOU, 106-RCOU, 107 BDKU1, 108-PDKU2. I have worked on a lot of Toshiba, but all analog trunks. I appreciate all of the input. I have worked on mostly DK14s and CTX systems and even older models. This is the first DK424i. And believe it or not...Michigan is scarce on toshiba techs when it comes to the older systems.
|
|
|
|
|
Joined: Jun 2005
Posts: 2,723 Likes: 7
Member
|
|
Member
Joined: Jun 2005
Posts: 2,723 Likes: 7 |
Can you remove the analog lines in slots 105 and 106? If you move a PDKU to slot 101 then you would change all the port numbers for all the extensions.
|
|
|
|
|
Joined: Jan 2008
Posts: 76
Member
|
|
Member
Joined: Jan 2008
Posts: 76 |
Yes I can. Thank you. Was reading the System record sheets and it looked like you could only put it in slot 108.
|
|
|
|
Forums84
Topics94,518
Posts639,976
Members49,850
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
266
guests, and
39
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
