web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Mar 2011
Posts: 36
Member
OP Offline
Member
Joined: Mar 2011
Posts: 36
Does anyone have any thoughts on Samsung OfficeServ (7100/7200S) inbound (POTS, PRI or SIP trunk)call routing based on inbound CallerID? I would like to add numbers (similar to Call Block) and have the calls from a specific set of numbers auto route to a anounce only VM then hangup. Or, possible 3rd party device\software to intercept over SIP trunk by inbound CallerID and re-write\route to a "Catch-ALL" DID that the PBX AA can then send to a corresponding anounce only VM. Lots of applications in mind, one being handling re-occuring un-wanted Callers. Thanks in advance.


Old Network Guy and New Phone Guy, CLI=MMC?
Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Jun 2006
Posts: 3,004
Likes: 4
Moderator-Samsung
*****
Offline
Moderator-Samsung
*****
Joined: Jun 2006
Posts: 3,004
Likes: 4
I know you can do individual number routing (i do this for nuisance callers for customers, send them a a virtual which goes nowhere).

CLI routing will override the DID routing, you specifiy a destination for all RP's, and whether to reject the call or not.

DM Menu 3.2.5 CLI Ringing is what your looking for

Joined: Mar 2011
Posts: 36
Member
OP Offline
Member
Joined: Mar 2011
Posts: 36
Thanks NameLess. That actually worked well. I assume I can also attach an anounce only VM to the virtual? Calls were mostly nuisance, however annouce only could be helpful in some circumstances. thanks again.


Old Network Guy and New Phone Guy, CLI=MMC?
Joined: Jun 2006
Posts: 3,004
Likes: 4
Moderator-Samsung
*****
Offline
Moderator-Samsung
*****
Joined: Jun 2006
Posts: 3,004
Likes: 4
Yep, just forward the virtual to the vm and program as per normal

Joined: Oct 2016
Posts: 4
Member
Offline
Member
Joined: Oct 2016
Posts: 4
One more note, you can also route the calls within the voicemail system using a menu that takes its input from caller ID number. We had someone harassing us, and it was easy enough for us to block their phone number using DM 3.2.5 CLI Ringing. But of course the troll just started calling us by blocking their caller ID and coming in as an anonymous caller. This person was calling us after hours and leaving harassing voicemail messages. I wanted to block them from leaving voicemail messages but I did not want to block all incoming calls without Caller ID at the carrier level. So I created a custom menu in the SVMI that processes all calls before they go to a mailbox. If there is no caller ID on the call, it is routed to the intercept message telling them that they need unblock their caller ID and call back. If caller ID is present, then the call is passed through to the FWD STATION or FWD TRUNK menu and processed as it normally would be to take a message. It works great.


Moderated by  nameless, pvj 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,113 Shoretel
187,717 CTX100 install
186,811 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 7
Who's Online Now
3 members (Touch Tone Tommy, KRRath, Curlycord), 72 guests, and 410 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5