|
|
Joined: Sep 2016
Posts: 11
Member
|
OP
Member
Joined: Sep 2016
Posts: 11 |
Looking for some help. Recently started working on a NEC 48/192 and need to connect to it through IPK through direct connect, serial cable is plugged in correctly and everything but I can't get it to go. I don't know if there is a password set to connect or even what the password might be, but I have tired multiple settings and either get "Data set ready is off" or "connection timed out"
any advice would be great.
Last edited by PMtech; 09/14/16 04:32 PM.
|
|
|
|
|
Joined: Nov 2008
Posts: 953
Member
|
|
Member
Joined: Nov 2008
Posts: 953 |
Do you have an MIF card in he system?
"The Only Stupid Question, Is the Question Thats not Asked."
|
|
|
|
|
Joined: Sep 2016
Posts: 11
Member
|
|
OP
Member
Joined: Sep 2016
Posts: 11 |
|
|
|
|
|
Joined: Nov 2008
Posts: 953
Member
|
|
Member
Joined: Nov 2008
Posts: 953 |
Did You Program The Slot Through the Phone for it? You have to get into System Programming through a Phone to Program the Slot to be an MIF. Its been so long since I've done it, I think slot A1?
"The Only Stupid Question, Is the Question Thats not Asked."
|
|
|
|
|
Joined: Sep 2016
Posts: 11
Member
|
|
OP
Member
Joined: Sep 2016
Posts: 11 |
Alright, thanks I will have to try that, and also just wondering, any idea how to set up the Automatic Directory.
|
|
|
|
|
Joined: Sep 2016
Posts: 11
Member
|
|
OP
Member
Joined: Sep 2016
Posts: 11 |
IPK only gives me the options from COM1 and COM3 to connect through
|
|
|
|
|
Joined: May 2005
Posts: 1,005
Member
|
|
Member
Joined: May 2005
Posts: 1,005 |
|
|
|
|
|
Joined: Sep 2016
Posts: 11
Member
|
|
OP
Member
Joined: Sep 2016
Posts: 11 |
|
|
|
|
Forums84
Topics93,824
Posts636,752
Members49,644
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
43
guests, and
18
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
