|
Joined: Jan 2007
Posts: 1,014
Member
|
OP
Member
Joined: Jan 2007
Posts: 1,014 |
Greetings, I did a dumb thing. I was logged into an OS7400 and pulled my laptop before exiting OSDM. Now if I try to log into the system I get IT Tool In Use. I tried to just pull the Lan connection, didn't help. Is there anything else I can do short of a system reboot? TIA,
John 807
|
|
|
|
Joined: Aug 2006
Posts: 1,769 Likes: 7
Moderator-Iwatsu
|
Moderator-Iwatsu
Joined: Aug 2006
Posts: 1,769 Likes: 7 |
I've had that happen to me on remote systems once or twice. Sometimes it will time itself out, depending on how you have that set in programming.
Sometimes the thoughts in my head get so bored, they go for a stroll through my mouth. This is rarely a good thing.
|
|
|
|
Joined: Dec 2010
Posts: 679
Member
|
Member
Joined: Dec 2010
Posts: 679 |
The timeout for the DM/IT tool is set to 5 minutes. So should be good after that.
|
|
|
|
Joined: Jan 2007
Posts: 1,014
Member
|
OP
Member
Joined: Jan 2007
Posts: 1,014 |
The last time I was in that PBX I was local on their network. That was about 2 weeks ago. I think I might have not exited the application and just packed up my laptop and left. Of course I don't know what IP address my laptop grabbed since it was dhcp.
John 807
|
|
|
Forums84
Topics93,820
Posts636,739
Members49,643
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Coral Tech),
144
guests, and
19
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|