|
|
Joined: Jan 2008
Posts: 63
Member
|
Member
Joined: Jan 2008
Posts: 63 |
try to get a clear picture on how to set up Sv9100 to TWC cable sip trunk, TWC send me the sip information to fill out, indicated the ESG gateway to PBX connection is WAN,IP address is 172.16.x.x.255.xxx.xxx.xxx.my question is on the 9100 what need to be assign to 10-12-09 and 84-26.10-23? do I need to a Router in between TWC ESG gateway ?
Thanks.
JOHNNY
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Dec 2006
Posts: 83
Member
|
Member
Joined: Dec 2006
Posts: 83 |
Johnny,
We deal with TWC all of the time. Need to have TWC set a local LAN IP Address and subnet on their ESG. Then on the SV9100 the SIP Trunk will communicate to this LAN IP. NTAC has a cheetsheat on this re: TWC.
|
|
|
|
Joined: Jan 2008
Posts: 63
Member
|
Member
Joined: Jan 2008
Posts: 63 |
Thanks to nec-guru, I got the cheat sheet from NTAC but still not clear, it talks about may needs to do Port Forwarding? 1.Do I need to need to do it? 2.tell TWC to change the ESG hand out to PBX from WAN to LAN ? I need two LAN Port. 3.what I need to assigned to 10-23 IP address?
Thank you very much.
JOHNNY
|
|
|
Forums84
Topics94,512
Posts639,933
Members49,844
|
Most Online5,661 May 23rd, 2018
|
|
1 members (justbill),
225
guests, and
34
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|