Panasonic Tvs 125

Print Thread

Rate Thread

Panasonic Tvs 125 #606649 01/02/17 04:58 PM
Joined: Nov 2005 Posts: 323 Los Angeles srd1 Member
srd1 Member Joined: Nov 2005 Posts: 323 Los Angeles	Have a kxtd 816 w/ tvs 125.2 port. Was working for yrs. Now won't answer When I dial 165, says not valid. Can't get into any part of VM. Powered down and up. There is a red power light on. What do you think next step is?

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: Panasonic Tvs 125 srd1 #606660 01/02/17 10:33 PM
Joined: Jan 2007 Posts: 1,217 Los Angeles 94astro Member
94astro Member Joined: Jan 2007 Posts: 1,217 Los Angeles	Try connecting to it with Hyper Terminal, get physically connected and reboot the TVS and see if it reads any data. A solid red light usually means the unit is working and connection to the TD system is established. Is the TD816 programming still intact? There are initial steps to get the two units talking to eachother. The TVS is also at least 12 years old so it might have gone to voicemail heaven. Aaron

Re: Panasonic Tvs 125 srd1 #606671 01/03/17 11:28 AM
Joined: Nov 2005 Posts: 323 Los Angeles srd1 Member
srd1 Member Joined: Nov 2005 Posts: 323 Los Angeles	816 has program intact.Not sure if red light is solid or blinking. Old VM,definite.

Moderated by Carl Navarro, OBT

Hop To

Link Copied to Clipboard

sundance-communications.com/forum Forums TDM Business Telephone Systems Panasonic Telephones & Systems Panasonic Tvs 125