|
|
|
|
Joined: Dec 2016
Posts: 8
Member
|
|
Member
Joined: Dec 2016
Posts: 8 |
I have upgraded 2 of my Samsung OfficeServ Systems from V4.91 to V4.99 and since doing so, I am experiencing an intermittent problem on both systems. The problem is that at random times, when trying to phone out, the system does not give any dial tones and you cannot phone out. It is not possible to phone out on any of the BRI or SIP lines, but incoming calls are working fine.
I have spoken to our local Samsung Installer and they say that many of their clients who upgraded to V4.99 are having the exact same problem and that they have logged a fault with Samsung.
I have found that rebooting the system, reloading all the settings, or just leaving the system for a while solves the problem in the short term until it happens again which is about once or so per day.
Has anyone else observed this on V4.99?
Thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Nov 2009
Posts: 602
Samsung Moderator
|
|
Samsung Moderator
Joined: Nov 2009
Posts: 602 |
Not in the US at least. I'm about halfway through upgrading 800 offices to 4.99 and SIP and so far haven't had this problem.
|
|
|
|
Forums84
Topics94,548
Posts640,092
Members49,857
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
767
guests, and
38
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
