|
|
|
|
Joined: Mar 2010
Posts: 228
Member
|
OP
Member
Joined: Mar 2010
Posts: 228 |
IPEdge EC
Execulink SIP trunks on a dedicated private IP
I have been able to get inbound calls to hit the system bu with only 1 way voice and I can't get any outbound calls to connect to the trunks.
Just looking for ideas what might be blocking this traffic, ports are open and all the settings (that I know of) are correct.
Jason
Toshiba/Avaya/Nortel Installations and Service.
Honeywell-Paradox-Kantech-Keyscan-HIKvision Access control and CCTV
|
|
|
|
|
Joined: Apr 2015
Posts: 8
Member
|
|
Member
Joined: Apr 2015
Posts: 8 |
Is this though a sonicwall?
|
|
|
|
|
Joined: Oct 2011
Posts: 74
Member
|
|
Member
Joined: Oct 2011
Posts: 74 |
in your sip trunk configuration, service def tab, advance tab, bottom left, you have to put your MRS in manual & your public ip address for nat :5060
router: forward to the local ipedge ipadress sip :5060 udp
in System-media-relay-server. your public ip adress
|
|
|
|
|
Joined: Mar 2010
Posts: 228
Member
|
|
OP
Member
Joined: Mar 2010
Posts: 228 |
Thanks,
It wound up being information I didn't have from the provider. The Data and Voice were on separate distinct IP's so I had route the IPEdge directly to the private Voice tunnel and use the providers specific DNS servers in order to get two way voice working. It's amazing how far a little information will go!
Jason
Toshiba/Avaya/Nortel Installations and Service.
Honeywell-Paradox-Kantech-Keyscan-HIKvision Access control and CCTV
|
|
|
|
Forums84
Topics93,833
Posts636,789
Members49,649
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Curlycord),
35
guests, and
19
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
