|
|
|
|
Joined: Jun 2010
Posts: 3
Member
|
OP
Member
Joined: Jun 2010
Posts: 3 |
I've got a DK424 with five expansion cabinets. After a recent lightning incident at this facility, the base cabinet stopped communicating with the last two expansion cabinets.
I've tested the expansion cabs and they're OK. That leads me to think that the problem is either with the base cabinet or the processor. I don't have a replacement available for either, so I need to decide which is the more likely to fail. My techie-sense tells me the cabinet's backplane is probably passive, but it's been a while since I've seen one that wasn't against a wall.
Any thoughts on the most likely culprit?
Thanks!
D.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Feb 2007
Posts: 319
Member
|
|
Member
Joined: Feb 2007
Posts: 319 |
make sure the jumper is plugged in on the base cabinet power supply
|
|
|
|
Forums84
Topics94,279
Posts638,738
Members49,763
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
97
guests, and
68
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
