|
|
|
|
Joined: Jan 2017
Posts: 11
Member
|
|
Member
Joined: Jan 2017
Posts: 11 |
We have just taken over some medical clinics with Panasonic TDA-50 systems. I have noticed there are USB to Printer cables left behind at each site. What is the preferred programming method for these systems? I have downloaded the programming manual and it looks doable but when I tried routing incoming calls to a couple of extensions then delay to a couple other extensions I cant seem to get the timing right. Can anyone with some panasonic experience help? Thank you in advance.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jul 2006
Posts: 2,765 Likes: 22
Admin
|
|
Admin
Joined: Jul 2006
Posts: 2,765 Likes: 22 |
What's a USB to printer cable? TDA's program with a tool and a USB A to B cable, or via a serial cable, or with a phone. Ringing is done via ring groups and ring count. The main ring group usually has all of the phones in it with a ring count.
Your friendly Pana dealer can get you set up.
Carl
This model is end of life
|
|
|
|
|
Joined: Nov 2006
Posts: 714
Member
|
|
Member
Joined: Nov 2006
Posts: 714 |
We have just taken over some medical clinics with Panasonic TDA-50 systems. I have noticed there are USB to Printer cables left behind at each site. What is the preferred programming method for these systems? I have downloaded the programming manual and it looks doable but when I tried routing incoming calls to a couple of extensions then delay to a couple other extensions I cant seem to get the timing right. Can anyone with some panasonic experience help? Thank you in advance. That is the right cable , you also need the Panasonic Maintenance Console software.
|
|
|
|
|
Joined: Mar 2009
Posts: 400
Member
|
|
Member
Joined: Mar 2009
Posts: 400 |
 And someone who understands how to program the system to the align the human/technology equation as well 
Last edited by Not_sirius; 05/01/17 12:36 PM.
|
|
|
|
Forums84
Topics94,518
Posts639,974
Members49,850
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (justbill, sbdcomm),
301
guests, and
49
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
