web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#61052 12/01/08 07:16 AM
Joined: Sep 2006
Posts: 139
Member
OP Offline
Member
Joined: Sep 2006
Posts: 139
Hi, we are experiencing audio issues with 11 softphones recently installed at an international location and connecting via Internet.

Reported problems include noisy and lossy audio.

Initial testing of a single softphone worked well.

Client site and PBX site have ample Internet bandwidth. However Internet route traverses three other networks. Over the whole route there is inconsistant latency - several hops of 200+ ms where most hops are under 100ms.

I am trying to tune the connections using the IP settings for those softphones.

Does anyone have suggestions for the settings:

Avg frames/ IP packet
Avg in time frame % threshold
Avg in time frame timer
Minimum playback time
Speech encoding

I have a general understanding of what these do and a good background in networking but no direct experience with changing these settings.

Thanks for any help or advice received!

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

#61053 12/01/08 07:07 PM
Joined: Nov 2006
Posts: 241
Member
Offline
Member
Joined: Nov 2006
Posts: 241
Quote
Originally posted by dhostetter:
Avg frames/ IP packet
Avg in time frame % threshold
Avg in time frame timer
Minimum playback time
Speech encoding
RTP across the Internet is not perfect. The 8602 is limited to 4 frames per packet in G.711 and 6 frames per packet in G.729, although I suppose lower values are tolerated. You can try adjusting the Minimum Playback buffer to a higher value, something like (average latency + (audio frames per packet * 10)). It won't be perfect but will get you close. Also, try G.729. Compression is your friend here. You can forget about the two Avg in Time Frame fields for now as they only serve to trigger alarms.


60% of the time it works every time
#61054 12/02/08 02:30 AM
Joined: Sep 2006
Posts: 139
Member
OP Offline
Member
Joined: Sep 2006
Posts: 139
Thanks Jake!

I did realize after I posted about the avg in time frame fields only displaying a message.

I did switch to G.729B from G.729 and bumped audio frames up to 4. If there is no improvement today I will try your formula for minimum playback.

#61055 12/02/08 09:02 AM
Joined: Nov 2006
Posts: 241
Member
Offline
Member
Joined: Nov 2006
Posts: 241
I don't know if the 8602's support G.729B.


60% of the time it works every time
#61056 12/03/08 05:47 AM
Joined: Sep 2006
Posts: 139
Member
OP Offline
Member
Joined: Sep 2006
Posts: 139
After making those changes reports are that the softphones do not experience "slow audio". But still experience "scratchy audio".

I can't get a softphone user to call me so I don't know first hand what they are trying to describe.

I wonder what settings affect "scratchy" audio.

#61057 12/05/08 01:57 AM
Joined: Jun 2007
Posts: 490
Member
Offline
Member
Joined: Jun 2007
Posts: 490
The thing to keep in mind is that the settings that you are tweaking are attempting to make the best of a bad situation. End to end delay should be below 80ms for "business quality" and below 40ms for "toll quality" or standard PCM quality. If it is fluctuating greatly you are down another performance benchmark as well by way of jitter which should be 20ms/40ms for the same quality.
-729B will save some BW with the VAD but BW doesnt seem to be your issue-delay is
-Upping your frames per packet will save on BW but again delay is your issue. Also upping the frames per packet makes loss more impactful if there is any.
The buffers can only compensate for so much. If you are expecting reliable good quality you will need to consider SLA from provider if they offer it (doubtful) or implement dedicated WAN connectivity to this site.


ShoreTel, Inter-Tel, Mitel, NEC, Zeacom, Cisco, Digium, Adtran Certified
http://www.voipnetworkengineering.blogspot.com
#61058 12/12/08 10:41 AM
Joined: Sep 2006
Posts: 139
Member
OP Offline
Member
Joined: Sep 2006
Posts: 139
I've set audio packets per frame back to 3, sent the buffer to 120 ms and use BroadVoice for the codec. That seems to work pretty well.

The issue is that some days the route goes through Savvis and some days Sprintlink. With Sprintlink we see < 100ms every hop the whole way. With Savvis on some days the latency goes past 200ms and for some reason later hops on other networks also suffer as well.

We are monitoring the situation but yeah there is really not much we can do with that kind of network performance. We are planning to talk to the ISP's at the end points and see if they can think of a way to force the sprintlink route all the time.

Thanks for the advice and help!

#61059 12/12/08 01:51 PM
Joined: Jun 2007
Posts: 490
Member
Offline
Member
Joined: Jun 2007
Posts: 490
No prob, good luck; true Internet telephony can be rough.


ShoreTel, Inter-Tel, Mitel, NEC, Zeacom, Cisco, Digium, Adtran Certified
http://www.voipnetworkengineering.blogspot.com
#61060 12/23/08 04:13 AM
Joined: Sep 2006
Posts: 139
Member
OP Offline
Member
Joined: Sep 2006
Posts: 139
Broadvoice32 + Sprintlink = success.

The 3rd party vendor was able to convince their ISP to set a static route sending all their IP traffic destined for our network over Sprintlink exclusively. Sprintlink = low ping times.

That plus using the Broadvoice32 codec and tweaking up the received audio buffer a little bit cleared up our international VOIP issues.


Moderated by  Stix1 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,696
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,709 CTX100 install
186,794 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 12
TDKs79 8
jc2it 4
teleco 4
Who's Online Now
1 members (Toner), 131 guests, and 249 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5