|
|
|
|
Joined: Dec 2010
Posts: 11
Member
|
OP
Member
Joined: Dec 2010
Posts: 11 |
I am trying to upgrade the processor in a DK280 base cabinet from a RCTUC/D to a RCTUE/F. Currently there is a RSIU attached to the ribbon cable connecting the other cards. I tried to do the upgrade and did not put the RSIU in and when I powered the system up I did not get a dial tone so I could not run the system initialization programs. My question is: is putting the RSIU in going to make a difference? After the card is in should I get a dial tone so I can complete the upgrade? Any help would be GREATLY appreciated !
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jul 2014
Posts: 33 Likes: 1
Member
|
|
Member
Joined: Jul 2014
Posts: 33 Likes: 1 |
If you don't have an RSIU installed, then you have to have a card in that slot and plug your programming phone into port 5 on that card. with an rsiu installed, the programming port is #5 on the second card. So if all you did was yank the rsiu, and leave the first slot empty, move the next card over 1 slot, if you really don't want the rsiu in the system.
|
|
|
|
|
Joined: Dec 2010
Posts: 11
Member
|
|
OP
Member
Joined: Dec 2010
Posts: 11 |
|
|
|
|
Forums84
Topics94,279
Posts638,738
Members49,763
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
89
guests, and
78
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
