|
|
|
|
Joined: Apr 2008
Posts: 40
Member
|
|
Member
Joined: Apr 2008
Posts: 40 |
Well back to this issue,,,,talking to Embarq the t1 provider, they are monitoring the circuit (NI2) and say the switch is sending all calls as national so they are adding a 1. They are saying to send local area codes as unknown or local. Can someone help me out with this. Axxes 4.4
Again thanks in advance!!!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2005
Posts: 91
Member
|
|
Member
Joined: Jun 2005
Posts: 91 |
Go to System->Cabinets->T1 card (whichever one is to Embarq).
Call Type->Local
Its most likely set to National right now. Change the type to Local.
Different telco's definately do different things in their switches depending on the IE of the ISDN call setup, including the type of call it is. Qwest doesn't care what kind of call is made for either 7 digit, 10 digit or 11 digit calls. Others do.
You mainly have to worry about 7 digit and 10 digit calling. Everything else can be set to National or their default values and the switch will just send out all 10 digits anyway.
|
|
|
|
Forums84
Topics94,514
Posts639,941
Members49,844
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Toner),
141
guests, and
29
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
