Phone Systems


Previous Thread
Next Thread
Print Thread
Rate This Thread
#614817 - 12/13/17 02:25 PM Point to Point T-1  
Joined: Jul 2004
Posts: 295
Frankiephones Offline
Member
Frankiephones  Offline
Member

Joined: Jul 2004
Posts: 295
Riverhead,ny USA
Hey guys. I'm losing hope with my systems here.I have this question posted in both systems forums and figured i would try it here too. I have an old Executone 648 that i connected to a Zultys MX250 via a T-1. The circuit syncs up and looks like it works for the most part. I can call from one system to the other. The problem i am having is when i transfer a call from Executone to Zultys, the call is dropped. Engineers at Zultys originally told me the reason was because Executone was prepending the dnis digits with a # character. . Zultys sees the # as a delimiter character so it doesn't know what to do with the following digits. I was able to remove the # from the transfer sequence and thought that would fix the problem. It didn't. I get the same results. The Zultys guys are now telling me Executone is dropping the call. Below is a snap shot of the CAS Log of a transferred call.

Does anyone here know what it means ? The 5th line down DSP_ start_dtmf_collection is followed by 3 DTMF digits. Then "End of Dialing". What does the next few lines mean ?

Dec 11 10:58:42:683 - 2 - {0x20009} [147.464] [ptl_fsm] [CAS: 0/11] CAS_PTL_ST_IDLE -> CAS_PTL_ST_WINK_ON Rx 0xf
Dec 11 10:58:42:922 - 2 - {0x20009} [147.703] [ptl_fsm] [CAS: 0/11] CAS_PTL_ST_WINK_ON -> CAS_PTL_ST_WINK_OFF Rx 0xf
Dec 11 10:58:42:924 - 2 - {0x20009} [147.705] [ptl] [CAS: 0/11] Port 0 On(Ptl Notf Wink Off) state st_CC_IDLE
Dec 11 10:58:42:924 - 2 - {0x20009} [147.705] [ptl] [CAS: 0/11] Port 0 SetState: st_CC_IDLE(1) -> st_CC_WAIT_FOR_DTMF(26)
Dec 11 10:58:42:924 - 2 - {0x20009} [147.705] [cas_dsp] [CAS: 0/11] >> DSP_start_dtmf_collection
Dec 11 10:58:43:560 - 2 - {0x20009} [148.341] [cas_dsp] [CAS: 0/11] DSP:digit rx 0x32 2:
Dec 11 10:58:43:758 - 2 - {0x20009} [148.539] [cas_dsp] [CAS: 0/11] DSP:digit rx 0x30 0:
Dec 11 10:58:43:977 - 2 - {0x20009} [148.758] [cas_dsp] [CAS: 0/11] DSP:digit rx 0x31 1:
Dec 11 10:58:45:031 - 2 - {0x20009} [149.812] [ptl] [CAS: 0/11] End of Dialing
Dec 11 10:58:45:031 - 2 - {0x20009} [149.812] [ptl_fsm] [CAS: 0/11] CAS_PTL_ST_WINK_OFF -> CAS_PTL_ST_ANSWER Rx 0xf
Dec 11 10:58:45:031 - 2 - {0x20009} [149.812] [ptl] [CAS: 0/11] Port 0 On(Ptl Notf Answer) state st_CC_WAIT_FOR_DTMF
Dec 11 10:58:45:031 - 2 - {0x20009} [149.812] [ptl] [CAS: 0/11] Port 0 SetState: st_CC_WAIT_FOR_DTMF(26) -> st_CC_SETUP_AWAIT_MEDIA_TRM(6)
Dec 11 10:58:45:031 - 2 - {0x20009} [149.812] [ptl] [CAS: 0/11] media_request_frontend: port 0 ch 4107 media_status 0
Dec 11 10:58:45:040 - 2 - {0x20009} [149.821] [cas_dsp] [CAS: 0/11] DSP:media_info_rsp
Dec 11 10:58:45:040 - 2 - {0x20009} [149.821] [ptl] [CAS: 0/11] Port 0 SetState: st_CC_SETUP_AWAIT_MEDIA_TRM(6) -> st_CC_SETUP_SEND(7)

Google Telephone Equipment Search
#614819 - 12/13/17 05:04 PM Re: Point to Point T-1 [Re: Frankiephones]  
Joined: May 2002
Posts: 3,725
hitechcomm Online content
Moderator-Avaya, Polycom
hitechcomm  Online Content

Moderator-Avaya, Polycom
*****

Joined: May 2002
Posts: 3,725
New York, NY
I doubt that will work. Executone is a very old hybrid system. Zulus, is a IP system. Don't not work well together. Time to upgrade.


Moderated by  Silversam 

Refurbished Phones & Equipment Search
Shout Box
FREE DESI Labeling System Software!
FREE DESI Labeling Software - Click Here!
Most Recent 5 Post
one way speech
by nabulsi. 10/19/18 04:02 AM
Installer Requested in IN
by usedphones. 10/18/18 04:50 PM
"Group Call" on sv8100 DT330 Phone Display
by Leaf. 10/17/18 03:50 PM
Door Phone Box 3560-08 Outdoor Use?
by tylan. 10/17/18 02:42 PM
ESI 50 L Password
by Gary S.. 10/17/18 01:46 PM
Who's Online Now
38 registered members (vicbob, erniejoey, dexman, phonemeister, MooreTel, ChrisRR, newtecky, Carl Navarro, dogs, pvj, nameless, justbill, nabulsi, Professor Shadow, Yoda, Touch Tone Tommy, morephones, Mickamg, michaelg, Bob3470, DSinSD, mreilly, bigld, usedphones, Avidcomm, hbiss, jeffmoss26, getcit, hitechcomm, tylan, PatrickAllanTele, metelcom, stewie, jknichols, Daniel, upstateny, 2 invisible), 601 guests, and 439 spiders.
Key: Admin, Global Mod, Mod
Tech Support Line 1.800.766.3425
Over the Phone Tech Support for your Phones and Business Phone Systems
Popular Topics(Views)
Newest Members
bigld, PatrickAllanTele, Rider, g1250790, Kholz
48778 Registered Users
Forum Statistics
Forums62
Topics91,662
Posts623,615
Members48,778
Most Online5,661
May 23rd, 2018
Today's Birthdays
junkman, Tom J.
Top Posters(30 Days)
dexman 57
Ruben 19
Daniel 17
SSPhone 16
RESPONSIVE WEBSITE DEVELOPMENT Need to check code
Free Phone Repair Diagnostic
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2018
Trusted Partners
Sitemap