|
Joined: Jan 2017
Posts: 38
Member
|
Member
Joined: Jan 2017
Posts: 38 |
Specs of system are below.
We only have DS-5021D phones.
Employees are reporting that the lights are not working on some phones in Cab2 slots 2 & 3. The status indicator light does not come on when the handset is picked up. Also, the other button lights, regardless of feature programmed, are not lighting up.
Any thoughts?
OS7400 (v4.92) as Cab1. [LP Version '14.04.01 V2.03] S1: TEPRI2 ['11.05.03 V4.29] S2: TEPRI2 ['11.05.03 V4.29] S3: MP40 ['15.07.30 V4.92] S4: SVMi20E ['09.04.22 V5.03] S5: 16DLI2 S6: 16CLI2 S7: 16DLI2 S8: 16DLI2 S9: 16DLI2 S10: 16DLI2 S11: OAS ['09.08.26 V2.01] (Not used)
OS7200 as Cab2 [ LP Version '12.04.27 V4.31] S1: NO CARD S2: 16DLI2 S3: 16DLI2 S4: 16MWSLI (not used) S5: NO CARD
"Try not to become a man of success, but rather try to become a man of value" ~ Albert Einstein
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: May 2004
Posts: 761 Likes: 2
Member
|
Member
Joined: May 2004
Posts: 761 Likes: 2 |
|
|
|
|
Joined: Jan 2017
Posts: 38
Member
|
Member
Joined: Jan 2017
Posts: 38 |
Both a soft restart and a hard turn-the-power-off restart several times. We even lost power to the building about 2 weeks ago twice. Didn't help.
Technician came and updated the MP40 to 4.98 and LP in Cab2 to 4.33. Had to restore all settings from the backup we did as it did a clean install / wiped all settings.
Still had trouble with lights.
Did another hard power-off restart and things worked fine.
Must've been some corrupt config of ports.
"Try not to become a man of success, but rather try to become a man of value" ~ Albert Einstein
|
|
|
|
Joined: Nov 2013
Posts: 57 Likes: 1
Member
|
Member
Joined: Nov 2013
Posts: 57 Likes: 1 |
Did you try moving the 16DLI cards around to a different slot?
|
|
|
|
Joined: Jan 2017
Posts: 38
Member
|
Member
Joined: Jan 2017
Posts: 38 |
Didn't move any of the cards.
During the update, didn't realize until Tuesday, 2017-12-26 that on the SVMi-20E mailboxes 201-220 were all wiped out along with any saved (orphaned) messages. Had to re-create tham all.
This morning Cab2, Slot3, Chan6 quit working. No lights at all on the phone. Had been working earlier this week. Moved from Cab2, Slot3, Chan6 to Cab2, Slot3, Chan1 and it started working again.
I've contacted the tech and asked them to contact Samsung regarding this issue. I'm not sure what else I can do.
"Try not to become a man of success, but rather try to become a man of value" ~ Albert Einstein
|
|
|
|
Joined: Jan 2017
Posts: 38
Member
|
Member
Joined: Jan 2017
Posts: 38 |
Update: The cabinet has been updated to 4.98. We removed all cards we are not using and put another 16DLI2 in cabinet 1. We also replaced the cables between the cabinets with shorter high speed cables.
Most, but not all, extensions in cabinet 2 (S2 and S3) have no lights on the phone. The top indicator light doesn't come on when you pick up the handset. The call lights don't turn green when you pick up a line. Even the speaker phone light doesn't come on when you hit the button.
A ticket has been opened with Samsung and a copy of the DB sent in. The technician thinks the EPLD version may have something to do with it. Samsung is asking him to call in to distributor support.
Here's our current cabinet setup: OS7400 (v4.98) as Cab1. LP Version: '14.04.01 V2.04 Option Board 1: CRM Option Board 2: CID2 Option Board 3: MISC Board EPLD Version: V01 Board PCB Version: V01 Card EPLD Version: V09 Card PCB Version: V01
S1: TEPRI2 ['11.05.03 V4.29] S2: TEPRI2 ['11.05.03 V4.29] S3: MP40 ['16.08.01 V4.98] S4: SVMi20E ['09.04.22 V5.03] S5: 16DLI2 S6: 16CLI2 S7: 16DLI2 S8: 16DLI2 S9: 16DLI2 S10: 16DLI2 S11: 16DLI2
OS7200 as Cab2 LP Version '14.04.01 V4.33 Option Board 1: Option Board 2: Option Board 3: Board EPLD Version: V00 Board PCB Version: Card EPLD Version: V01 Card PCB Version: V01
S1: NO CARD S2: 16DLI2 S3: 16DLI2 S4: NO CARD S5: NO CARD
"Try not to become a man of success, but rather try to become a man of value" ~ Albert Einstein
|
|
|
|
Joined: Jan 2017
Posts: 38
Member
|
Member
Joined: Jan 2017
Posts: 38 |
Update:
Replaced the LCP in cabinet 2 because of HDLC errors. That was causing random transfers of calls from extensions in cabinet 2 to other extensions. The phones in cabinet 2 would basically do a fast reboot. This did not fix the lights on phones.
Last night I did a memory clear and populated all settings manually. Finally the phone lights are working!
Also, a side note: ome people who have extensions in cabinet 2 complained that they had to dial very slowly as some numbers would be dropped during dialing outbound. I hope this fixed that issue as well.
So, all of you techs were definitely right. Corruption in the database setup.
Thank you all for your insight and help!
"Try not to become a man of success, but rather try to become a man of value" ~ Albert Einstein
|
|
|
Forums84
Topics94,480
Posts639,775
Members49,829
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Yoda),
66
guests, and
18
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|