|
|
|
|
Joined: Sep 2007
Posts: 127
Member
|
OP
Member
Joined: Sep 2007
Posts: 127 |
Is it possible to setup a station to automatically use a particular trunk droping any active calls?
I would like to make a line for our elevator system to dail out. I was going to use a analog line with a DID and would like you add the option to force dial out if the preset trunk(s) is in use.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2008
Posts: 145
Member
|
|
Member
Joined: Jun 2008
Posts: 145 |
That is called "House Phone" in Station Programming. Set this to be the particular trunk you want to use.
Ain't technology wonderful? Nothing like being on the bleeding edge. 
|
|
|
|
|
Joined: Nov 2006
Posts: 241
Member
|
|
Member
Joined: Nov 2006
Posts: 241 |
Tellink is correct, but it won't drop an active call. Better to house phone to a trunk group and grab any available line. If you must use a particular line for this dialing then I'd deny CO access to it for all other stations. I don't know how you'll get an inbound caller off the line if this is in a ring-in hunt group though.
60% of the time it works every time
|
|
|
|
|
Joined: Jun 2008
Posts: 145
Member
|
|
Member
Joined: Jun 2008
Posts: 145 |
Originally posted by SoCalJake:
Tellink is correct, but it won't drop an active call. Better to house phone to a trunk group and grab any available line. If you must use a particular line for this dialing then I'd deny CO access to it for all other stations. I don't know how you'll get an inbound caller off the line if this is in a ring-in hunt group though. Or you could use two CO trunk ports and a RJ21X which would allow the elevator to sieze that particular trunk while still allowing its use to other devices when not needed by the elevator.
Ain't technology wonderful? Nothing like being on the bleeding edge.
|
|
|
|
|
Joined: Nov 2006
Posts: 241
Member
|
|
Member
Joined: Nov 2006
Posts: 241 |
Originally posted by Tellink:
Or you could use two CO trunk ports and a RJ21X which would allow the elevator to sieze that particular trunk while still allowing its use to other devices when not needed by the elevator. Good thinking. Is that a 31x or 38x?
60% of the time it works every time
|
|
|
|
|
Joined: Jun 2008
Posts: 145
Member
|
|
Member
Joined: Jun 2008
Posts: 145 |
Yep, I fat-fingered that. I meant the 31X.
Ain't technology wonderful? Nothing like being on the bleeding edge.
|
|
|
|
Forums84
Topics94,285
Posts638,781
Members49,766
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (Yoda, justbill),
130
guests, and
173
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
