|
|
|
|
Joined: Apr 2011
Posts: 3
Member
|
|
Member
Joined: Apr 2011
Posts: 3 |
I am putting an external MOH device on a Comdial DX 120 and having an issue. I've plugged the music source into Jack 1, and confirmed via a butt set that there is in fact music at that connection. The jumper on the CPU is set to External. I've also tried connecting the source to the second jack that is usually background music.
Placing a call outside the system, I hear no music on hold, and when in the background slot, and volume all the way up on the handset, I hear no background music either.
Is there additional programming required on the system itself to enable these two ports for the music? Documentation that I have seen seems pretty straightforward for this to work.
Any advice would be appreciated.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2018
Posts: 345 Likes: 1
Member
|
|
Member
Joined: Mar 2018
Posts: 345 Likes: 1 |
The port on the phone system is a mono port, so if you are using a stereo jack then you will not get the music to come across. To get the lines to have the MOH on them you have to program each line to that MOH port.
The Cloud is just someone else's computer!
|
|
|
|
|
Joined: Apr 2011
Posts: 3
Member
|
|
Member
Joined: Apr 2011
Posts: 3 |
Thanks, I'll look at the line programming.
|
|
|
|
Forums84
Topics94,526
Posts640,017
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
301
guests, and
44
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
