|
|
|
|
Joined: Aug 2003
Posts: 268
Member
|
|
Member
Joined: Aug 2003
Posts: 268 |
I have an SL2100 installed with a single Valcom 1030C page horn powered by a Valcom 324 power supply. Cat5 cable (125 ft.) with blu/wht (Tip) org/wht (Ring) grn/wht (-24V) brn/wht (GND). Using pins 1 and 8 to get the paging. When the customer uses external page, the audio breaks up and is intelligible. I played with the gain and added a V1094A because Valcom said the audio was too low coming from the NEC, but it still does the same thing. I have installed these before with this method on the DSX and SL1100 without issue. Softly speaking seems to be OK, but any type of normal speech breaks up. I also made some change that took effect when I disconnected from PC Pro that now gives a low beeping over the page horn ALL the time. Thoughts?
Last edited by Mickamg; 03/26/18 01:38 AM.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2004
Posts: 4,220 Likes: 2
Member
|
|
Member
Joined: Sep 2004
Posts: 4,220 Likes: 2 |
24V on a page port? Sounds to me like that paging system is setup to page via a trunk port.
|
|
|
|
|
Joined: Aug 2003
Posts: 268
Member
|
|
Member
Joined: Aug 2003
Posts: 268 |
The Valcom 1030C is a self amplified horn that uses 600 Ohm T/R input and a separate -24VDC power supply. It eliminates the need for a traditional 25V or 70V Amp and horns.
Last edited by Mickamg; 03/26/18 01:57 PM.
|
|
|
|
|
Joined: Sep 2004
Posts: 4,220 Likes: 2
Member
|
|
Member
Joined: Sep 2004
Posts: 4,220 Likes: 2 |
Ah, I thought you had 24V on the T/R to the phone system. Have you tried moving the horn by the system? Is this a new cable? Could the power be bleeding into the talk pair?
|
|
|
|
|
Joined: Aug 2003
Posts: 268
Member
|
|
Member
Joined: Aug 2003
Posts: 268 |
Turns out I just needed a larger 24V power Supply because the run was longer than usual. Good and strong paging now.
|
|
|
|
Forums84
Topics94,516
Posts639,968
Members49,848
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
151
guests, and
35
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
